Deanoko Posted February 25, 2023 Share Posted February 25, 2023 OK kids, I am deep into the installation of my car that HAS the accessory wiring harness because the car came with Guidematic. I have found and separated the loom connections for the brake switch AND the controller , BUT I'll be damned if I see any provision on the upper harness (as depicted in fig. 11-178) for the engagement switch and light! Is the illustration bad, or was Fisher having a bad day, or ? I have looked everywhere. The upper harness just heads from its clip above the clock area down to the ignition sw and wiper without anything being tied off for the cruise as shown. Link to comment Share on other sites More sharing options...
Dales90 Posted February 25, 2023 Share Posted February 25, 2023 There is the vacuum line at the brake switch also. If it is leaking, the cruise will be inop. Link to comment Share on other sites More sharing options...
Deanoko Posted February 26, 2023 Author Share Posted February 26, 2023 29 minutes ago, Dales90 said: There is the vacuum line at the brake switch also. If it is leaking, the cruise will be inop. I have that vaccum line routed through the firewall waiting to be hooked up. If you comprehended my post, that is not the issue. It's the least of my worries, if I don't have all the necessary wiring in place. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now