Guest Posted April 3, 2003 Share Posted April 3, 2003 How do you remove the cluster panel to install new dash light bulbs. Does the pad have to come off if so where are thescrews. Any help would be appreciated. I'm trying noy to break any parts, thanks Link to comment Share on other sites More sharing options...
rocketraider Posted April 3, 2003 Share Posted April 3, 2003 Is this 88/98, Cutlass or Toronado? It's a tight fit, but you should be able to replace dash lights on all but Toro by reaching up behind the dash. Toros are easier by taking the speedometer panel loose at top and bottom and tilting the top edge toward the seat.I can offer more info once I know which carline you're working with. Link to comment Share on other sites More sharing options...
Guest Posted April 4, 2003 Share Posted April 4, 2003 It is a 69 olds cutlass with air,thanks Link to comment Share on other sites More sharing options...
rocketraider Posted April 4, 2003 Share Posted April 4, 2003 You don't have to pull the dash or the individual pods, but you'll probably have to take the A/C manifold loose behind the dash to get up in there. Should be a couple of screws holding it to the heater box assembly. Remove it and move the left-hand flexible duct around for access to the dash lights. There is no really easy way to get at them on 68-69. Just takes patience. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now