Power windows wiring

[seasand77]

<img src="http://www.aaca.org/ubbthreads/images/graemlins/confused.gif" alt="" /> I'm trying to put the power window circuits back together. The drivers (4 position) switch has eight wires running to the eight circuit board posts on the back of the switch along with the red power wire to the ninth post, but the last guy had them apart and I can't tell which goes where. There is also a tenth post on the circuit board but no apparent wire. Is the reversing switch in the motor itself? How are the individual motors wired so they act independent of the master four position switch?