Brooklyn Beer Posted September 5, 2019 Share Posted September 5, 2019 (edited) Until I can get around to repairing the factory AC I want to take the AC compressor off the belt system. Right now it is driven with two belts and a double pulley that is separate from the fan/water pump. The fan has it's own belt with an offset idler pulley. In non AC cars the alternator and fan are driven by a single belt with no idler pulley and with a deeper pulley to get it in line with the alternator pulley. I am also looking for the fan clutch assembly and fan that would go with this Pulley. To finish it off I am also looking for the radiator fan shroud for a 22" BB radiator. Would be guessing that any Chrysler equipped with a 361 without AC would have the same pulley? Edited September 5, 2019 by Brooklyn Beer (see edit history) Link to comment Share on other sites More sharing options...
wldavis Posted September 15, 2019 Share Posted September 15, 2019 Have you tried Stephens Performance ? www.stephensperformance.com 256-247-1332 They sell new & used Mopar parts from the '60's-early '70's. They might have what you need. Or, they might be able to point you in the right direction to find what you need. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now