Sactownog Posted April 23, 2019 Share Posted April 23, 2019 JUST AN UPDATE FOR ANYONE TRYING TO ADJUST THERE 30s DODGE STEERING: so after reading manual's, tip's, tricks, etc... its really just play with it until lash/steering become tight/lose. top screw controls distance between left and right wheel touch. by this I mean that when you turn the wheel to the left then it touches the point where wheel begin's to turn, then turn to right where it touches. there is a space that has to be closed by screwing the top screw down. (you must remove bottom 4 bolts before screwing down top screw or it will not allow adjustment) side screw, can be adjusted while bottom screws are lose, however when 4 bottom screws are tightened, you may need to adjust side screw slightly for left to right steering "tension" adjustment. drive vehicle, then adjust again as needed. note: I still need to loosen bottom bolts and screw down top screw about 1/8 turn again to take out left right adjustment. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now