Guest EvanRenck Posted April 26, 2016 Share Posted April 26, 2016 It turns out the armature for the generator is fried in the '32 and I need to track down a new one. The part number from Delco Remy is 1883706 Part "ARMATURE G" and the model is 940-T2 with serial number 186631. If anyone can help me track one down it would be greatly appreciated! Link to comment Share on other sites More sharing options...
Bob Engle Posted April 26, 2016 Share Posted April 26, 2016 All 32 series use the same generator. Distributor is different, but all internal generator parts are common for 1932. I may have a used armature. I'll have to check my parts bin to see if I do have one and what it's condition would be. Bob Engle Link to comment Share on other sites More sharing options...
Brian_Heil Posted April 26, 2016 Share Posted April 26, 2016 I would contact Jason Smith at AER. He just rebuilt my Starter / Generator. Great work. Has lots of part too. May be able to help you. http://www.aerrebuild.com/ Link to comment Share on other sites More sharing options...
Bob Engle Posted April 26, 2016 Share Posted April 26, 2016 I checked two armatures on the growler One is shorted out but the other checks good. Unfortunately the generator was run with smaller than stock brushes and the armature has about 1/16' groove that would have to be turned down. If you are interested in a used armature, pm me. I did have a starter armature rewound many years ago. Cost was $75 then. You may want to check fir a reputable rewinder. Bob Engle Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now