Guest Posted May 27, 2002 Share Posted May 27, 2002 Is there a modern tie rod end that can be modified to fit a 1927 Dodge senior with a 1ins tie rod? Link to comment Share on other sites More sharing options...
56Roadmaster Posted May 27, 2002 Share Posted May 27, 2002 Hi,<BR> Most likely you can update, but you will need to give thread size,Left or right hand thread as well as stud taper size or ball socket size.<BR> possibly try Just Suspension In New Jersey, USA, for a replacement they might help you. <BR> Really you are going to have to carefully measure yours and compare with modern specifications, If you have the tapered stud mount type, start comparing some Dodge, GMC, and Ford 1 ton and up trucks from late 1960's to present.<BR> Another thought my 46 Dodge flatbed uses a 1" thread with a tapered stud,one LH one Rh thread.They may be close is a WFM 1.5 ton model. Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2002 Share Posted May 27, 2002 Thank you Scott.Given there size ,it is quite possable they used them on trucks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now