Jump to content

Headlight Lens/1924 Buick Parts WTB


Recommended Posts

1) I need a pair of headlight lens for my 1924 -45 touring Buick. They are a Guide Tilt Ray that measures 9" overall with 7 3/4" of actual lens.

2) Any parts out there for the light / ignition switchs? I need the plate that is black has the positions stenciled on it which covers the switch it self, the glass and levers. This is the not the round one but the one that is more oval. I purchased a good switch from Ebay that has the correct number of terminals but its round, therefore I need the other cover plate/bezel

3) Need the advance lever on the steering wheel which has the the thumb knob/lever under the horn button

4) Need two estrusion (sp?) plates that are kidney shaped for the door latches on the inside of the door. These hold the covering of the door material where the latch comes through.

5) Need two door knobs that screw on to the top of the latch on the inside of the door. They are just an extention of the latch and were nickle plated. About 1" + long and round.

6) Need four scuff valance plates, that have the word BUICK cast as part of the plate.

7) Need the handle bar on the back of the front seat/the attachment brackets. I believe this was used to drap a blanket over. 8) Need 7 lug/clamps for the wheels that have BUICK on them.

Link to comment
Share on other sites

Guest stoptheclunkerbillnow!

I have half a dozen or so of the lug clamps. I may have the escutcheon plates for the door latches. My chassis is a 2 door coach, so some pieces are the same as an open car, but some are not. I'll take a look and keep in touch.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...