Guest drf24 Posted November 10, 2012 Share Posted November 10, 2012 Need help. I have been going through the electrical and cooling systems trying to make the car more reliable. Moved to the generator and found a broken brush spring and a severely worn brush. Pulled everything apart and cleaned. I ordered a new set of brushes and springs. I now realize there are two different size brushes! I am so close to finishing this I can almost hear the car starting again! Question is, where does the thinner odd ball brush go at, the other two are the same part number and the third is much thinner and has a copper color to it covering about 3/4 of the length. Thanks in advanceDean Fink Link to comment Share on other sites More sharing options...
R.White Posted November 10, 2012 Share Posted November 10, 2012 You may find this link helpful. Yesterday's Tractors - Third Brush Generators I think the smaller brush could be the "third" brush - see if it fits in the moveable holder. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now