Need help with 65 Riv reassembly of inner, outer fenders, question

[shart]

My friend and I are in the process of slowly putting back together my ’65 Riv. We’re trying to fit

the inner fender, outer fender and headlight hardware to see what goes where. Unfortunately I didn’t take any photos of this disassembly process. Attached is a photo for guys out there that have disassembly or reassembly experience with this year that might help. This is the passenger side. What I need to know is whether there is a bracket that closes the gap between the bottom of the headlight assembly and the inner fender or what ties them together. Certainly the top of the headlight assembly fits nicely and anchors to the outer fender, right? Thanks! Steve

<O:p> </O:p>

[alini]

Nothing goes there, the headlights were manufactured so they can switch from side to side. The mechanism that doesnt switch over. So that hole is for the drivers side mounting of the base of headlights. I looked at my assemblies and the same hole on my passenger light is clean, no marks of it ever having a bolt through it