Guest trappnman Posted September 16, 2012 Share Posted September 16, 2012 It starts okay when cold. When it get's up to normal operating temp and I turn it off and come back in 3-5 minutes it cranks really hard. I let it cool down and then it will start. I am thinking of putting a heat sheild over the starter if that is the problem. I had an old timer say that there may be carbon build up and when it gets warm it expands. Any other suggestions out there? Link to comment Share on other sites More sharing options...
trimacar Posted September 16, 2012 Share Posted September 16, 2012 The starter could be bad. First, check and make sure you have the large cables (if car is 6 volt). Small diameter 12 volt cables won't work. Also, it's best to run the ground cable from the battery directly to the mounting bolt of the starter, as this eliminates any corrosion issue on connections through the frame. Link to comment Share on other sites More sharing options...
D Yaros Posted September 16, 2012 Share Posted September 16, 2012 It would seem to me, if with the engine warmed the starter cranks normally, but the car will not start, it is NOT a starter problem. It could be either a fuel or ignition coil problem. Areas to consider? Link to comment Share on other sites More sharing options...
Guest trappnman Posted September 17, 2012 Share Posted September 17, 2012 Thanks for the responses, and ideas. Sorry for not explaining things better. I will try to explain what it sounds like when it tries to start. When it is warm it seems like the battery has lost it's charge and barely turns over, like it will turn over maybe once or twice real slow and then nothing. Yes, I will try running the ground also to the starter, it's worth a shot. Link to comment Share on other sites More sharing options...
Jeff Hansen Posted September 17, 2012 Share Posted September 17, 2012 First thing to check is ALL of the electrical connections associated with the starter. Make sure ALL connections are clean, bright shiny metal and that the wiring is in good shape. One connection that most people miss is the metal-to-metal connection where the starter solenoid bolts to the starter housing; also where the starter attaches to the block. I also recommend the extra ground strap mentioned by Mr. Coco. Also, as Mr. Coco suggests, make sure your battery cables are the proper size. Your car should start with no issues hot or cold.Please let us know how it goes.HTH,Jeff Link to comment Share on other sites More sharing options...
D Yaros Posted September 17, 2012 Share Posted September 17, 2012 Since it cranks slowly when warm, then it appears the problem may well be with the connections to the starter, battery or grounds. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now