Jbjgo Posted July 28, 2012 Share Posted July 28, 2012 I have a 1918 roadster with the wrong wheels. I fortunately found some correct, but am trying to remove the old hubs and brake drum to change. I can not get the hubs off. The axle is square with a drive pin from the hub thru the axle. When removed the hub moves outward about an inch but then stops. The external band is loose. I suspect the problem is the internal emergency brake mechanism. I loosened the emergency brake rod to no avail. I do not see a way of getting inside the brake hub as it is a solid metal shield rivited to the brake mechanism attached to the real tube around the axle I do see a screw on the bottomm of the hub which hold the whole mechanism t the tube around the rear axle, but am unable to get loose easily. Any experience in this area would be very appreciated. JIM Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now