Need Help to Identify a 1930's Headlight Bucket

[46HudsonPU]

Anyone know what vehicle this would go to? From it's appearance, it is for the left side of the vehicle, based on the bolt position, and the position of the screw to secure the lens & reflector (which go to the bottom when installed). And, it looks as if it has been modified - for a light on the top, and for a sealed beam (from the electrical connection). In the last picture, you see that it is stamped BI RAY;

Addendum: Received comment on information that I had already included in my original post, so thought I should organize it a bit, to make it more obvious.

- And, it looks as if it has been modified - for a light on the top, and for a sealed beam (from the electrical connection);

- In the last picture, you see that it is stamped BI RAY;

Edited June 25, 2012 by 46HudsonPU (see edit history)

[Guest Foggy norm]

Bi-Ray shell that has been customized to receive a sealed beam at some point in it's past life. To bad it has primer all over it, could be hiding other information.