1926 Buick Std valve lifter springs

[Guest chris bull]

Does a 1926 Buick model 26-20 standard 6 engine normally have valve lifter springs (Inner springs)?

My engine has valve springs in the head (Outer springs) but none in the bloock (Inner Springs). Illustrations in both the Reference Book and the Shop Manual show both Inner and Outer Springs in the Standard 6. However text in the Shop Manual mentions lifter springs for the Buick Master but not for the Standard.

Should I buy and install Inner springs where there were non or should I leave the engine without (the original state)? Any advice would be greatly appreciated.

Chris Bull

[Leif Holmberg]

In my parts books the 1927 second type are the first Std.model with 2 valve springs.

Leif in Sweden.

[Guest chris bull]

Leif - Tremendous help. Thanks. Just to make sure I understand: the 1926 should only have the upper valve spring. The 1927s would have both. Right? Any idea why they went to 2 sets? What use is the lower (inner) spring?

Thanks again

Chris

[Leif Holmberg]

There are a first type in 1927 Std,and later same year it came a second type with an inner and outer spring.I don`t know why,maybe some improvment of the engine r/m.

Leif in Sweden.