Lockhouse Posted March 6, 2011 Share Posted March 6, 2011 Hi,I'm after a chrome trunk handle for my '49 Sedan. Length of the steel shaft including thread should be around 70-72mm (I understand they can vary). Nothing too pitted - everyday runner standard would be fine - does not need to be rechromed\concours. Would ideally like something with correct keys.Thanks,Andy Link to comment Share on other sites More sharing options...
41specialman Posted March 7, 2011 Share Posted March 7, 2011 I might have one of those. it probably would need re keyed I will look and see what I have in the next few days getting cold and snow here thanks Jeff Link to comment Share on other sites More sharing options...
Lockhouse Posted March 7, 2011 Author Share Posted March 7, 2011 Ok no problem, I appreciate you taking a look, please wrap up warm! Link to comment Share on other sites More sharing options...
graydog Posted March 12, 2011 Share Posted March 12, 2011 Hi. I have a NOS, onecan sell cheap,please call,other parts avaible olso. Thanks Ed,914-245-5683 Link to comment Share on other sites More sharing options...
graydog Posted March 14, 2011 Share Posted March 14, 2011 Andy I sent you an e-mail on our discussion,let me know if you got it.I had trouble getting it to go. Thanks Ed Link to comment Share on other sites More sharing options...
Guest fortyninebuick Posted May 17, 2011 Share Posted May 17, 2011 This post caught my eye. I just had my trunk handle replated, and when I took it apart, the spring for the lock cover, "flipper" broke apart. Im trying to find a spring for it. Ive had no luck with the usual Buicks parts places. I tried making one out of a spring but its not working to well, I dont want to lose it. Any help would be appreciated.ThanksAl Link to comment Share on other sites More sharing options...
41specialman Posted May 17, 2011 Share Posted May 17, 2011 This post caught my eye. I just had my trunk handle replated, and when I took it apart, the spring for the lock cover, "flipper" broke apart. Im trying to find a spring for it. Ive had no luck with the usual Buicks parts places. I tried making one out of a spring but its not working to well, I dont want to lose it. Any help would be appreciated.ThanksAl Hello, is it tear drop shape looking? I have a couple spares with the spring cover that lets you put key if you need one jeff Link to comment Share on other sites More sharing options...
Guest fortyninebuick Posted May 17, 2011 Share Posted May 17, 2011 Hi, thanks for your reply. Yes it is teardrop shaped, I was only looking for the correct spring really, although I would take a cover/spring combo if necessary. If Im not mistaken, you put the cover into the hole and then slip the spring on from the back. Ive attatched a couple pictures.ThanksAl Link to comment Share on other sites More sharing options...
41specialman Posted May 17, 2011 Share Posted May 17, 2011 Hi, thanks for your reply. Yes it is teardrop shaped, I was only looking for the correct spring really, although I would take a cover/spring combo if necessary. If Im not mistaken, you put the cover into the hole and then slip the spring on from the back. Ive attatched a couple pictures.ThanksAl This is a bit different than a 41 but I might have one on a parts car if they are still on it. it would be a colorado car so should be in good shape and I would just sell the whole lock assembly as I only have a 41 and a 34 chevy and will never use it give me a few days and will get to storage and look thanks jeff Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now