Guest 40series Posted November 7, 2010 Share Posted November 7, 2010 enough parts to fill a semi trailer. Let me know what you may need. Link to comment Share on other sites More sharing options...
Guest Chester Cheetah Posted December 2, 2010 Share Posted December 2, 2010 Looking to see have any Wildcats, looking for long console with tack? Link to comment Share on other sites More sharing options...
Guest 40series Posted December 2, 2010 Share Posted December 2, 2010 sorry, no consoles Link to comment Share on other sites More sharing options...
Long Roof Posted December 3, 2010 Share Posted December 3, 2010 Have any four barrel carbs with the electric start switch? Let me know if you do. Link to comment Share on other sites More sharing options...
Guest 40series Posted December 3, 2010 Share Posted December 3, 2010 I have a few Rochester 4jet cores for rebuilding. 40.00 Link to comment Share on other sites More sharing options...
Guest shorty7 Posted December 3, 2010 Share Posted December 3, 2010 how about a 1963 425 engine- 1963 or earlier 401-425 crankshaftThanksRob Link to comment Share on other sites More sharing options...
Guest 40series Posted December 3, 2010 Share Posted December 3, 2010 how about a 1963 425 engine- 1963 or earlier 401-425 crankshaftThanksRob I have the crank 75.00 Link to comment Share on other sites More sharing options...
Long Roof Posted December 3, 2010 Share Posted December 3, 2010 40series,I sent a PM with questions about the carbs. Link to comment Share on other sites More sharing options...
Guest shorty7 Posted December 3, 2010 Share Posted December 3, 2010 Hello So this crank has the larger hole on the inside and will alow me to bolt to my 57 dynaflo? shipped to mn 56055 for $75.ThanksRob Link to comment Share on other sites More sharing options...
Guest Posted December 4, 2010 Share Posted December 4, 2010 Hey shorty Look B4 you buy! Do you know where Dayton, MN is? Call @ 612-201-3342 Greg J. I'm between Champlin and Rogers. Got those parts you asked about, no shipping, drive up and see. Link to comment Share on other sites More sharing options...
tberd62 Posted December 9, 2010 Share Posted December 9, 2010 Do you have any 264 or 322 parts? Link to comment Share on other sites More sharing options...
mikecarnut Posted December 17, 2010 Share Posted December 17, 2010 Do you hve new rocker arms, shafts and push rods for a 401? Link to comment Share on other sites More sharing options...
Guest djohn81641 Posted March 15, 2011 Share Posted March 15, 2011 Do you have a water pump for a 59/60 Buick? Link to comment Share on other sites More sharing options...
Guest 40series Posted March 15, 2011 Share Posted March 15, 2011 Do you have a water pump for a 59/60 Buick?I do 65.00 exchange Link to comment Share on other sites More sharing options...
Guest fmsjr Posted March 15, 2011 Share Posted March 15, 2011 Looking for 1960 Electra Conv parts. Rear speaker grille, fuse block, radio speakers, trip odometer knob, steering wheel, front arm rests complete, glove box liner. Let me know if you can help. Link to comment Share on other sites More sharing options...
bigfootbob Posted March 16, 2011 Share Posted March 16, 2011 Will you have a Booth at the Portland Swap Meet? We will be set up at PIR on Thursday space 2341 with assorted Buick stuff. Stop by and say Hi.Bob208 861 0845 Link to comment Share on other sites More sharing options...
Guest 40series Posted March 16, 2011 Share Posted March 16, 2011 i will not have a booth but I am having HUGE BUICK PARTS YARD SALE! that week. I will stop by. Link to comment Share on other sites More sharing options...
Airy Cat Posted March 21, 2011 Share Posted March 21, 2011 I need a timing chain cover from a '57 or '58 Buick Link to comment Share on other sites More sharing options...
Guest 40series Posted March 21, 2011 Share Posted March 21, 2011 I have a timing cover for 100.00 shipping included. No broken bolts or electrolosys damage. Link to comment Share on other sites More sharing options...
Guest minkos Posted March 23, 2011 Share Posted March 23, 2011 hello, do you have a heat riser valve for a '66 425, complete and working? thanksmark BCA 14421 Link to comment Share on other sites More sharing options...
Guest Rob J Posted March 26, 2011 Share Posted March 26, 2011 Looking for a power antenna, and the power antenna fender bezel from a 65 Riviera.Also looking for an upper AC compressor bracket from a 64-66 Dual Quad motor.Thanks. Link to comment Share on other sites More sharing options...
Guest dwx4 Posted March 26, 2011 Share Posted March 26, 2011 looking for a 364 4bbl intake. thanks Link to comment Share on other sites More sharing options...
Guest 40series Posted March 26, 2011 Share Posted March 26, 2011 Looking for a power antenna, and the power antenna fender bezel from a 65 Riviera.Also looking for an upper AC compressor bracket from a 64-66 Dual Quad motor.Thanks.I have the antenna for 65.00. will need a mast. Link to comment Share on other sites More sharing options...
Guest 40series Posted March 26, 2011 Share Posted March 26, 2011 looking for a 364 4bbl intake. thanksdo not have at the moment Link to comment Share on other sites More sharing options...
Glenn McMahon Posted March 26, 2011 Share Posted March 26, 2011 Hello,Any aluminum valve covers for a 425 64 Riv?Thanks,GM Link to comment Share on other sites More sharing options...
Guest 40series Posted March 26, 2011 Share Posted March 26, 2011 I do not have any of the ones with BUICK on the side. They sell very fast Link to comment Share on other sites More sharing options...
GBGS Posted April 1, 2011 Share Posted April 1, 2011 Looking for a Carter AFB # 3922. Thanks. Link to comment Share on other sites More sharing options...
Guest Rob J Posted April 1, 2011 Share Posted April 1, 2011 I sent a pm on that power antenna and fender bezel, did you not get it?I'm interested, but would like to see a pic or so. Thanks. Link to comment Share on other sites More sharing options...
Guest 40series Posted April 2, 2011 Share Posted April 2, 2011 Looking for a Carter AFB # 3922. Thanks.do not have a good one. Link to comment Share on other sites More sharing options...
Guest 40series Posted April 2, 2011 Share Posted April 2, 2011 I sent a pm on that power antenna and fender bezel, did you not get it?I'm interested, but would like to see a pic or so. Thanks.I did not. pm me your email address. Link to comment Share on other sites More sharing options...
GBGS Posted April 2, 2011 Share Posted April 2, 2011 do not have a good one. Does not have to be a good one just as long as it says 3922S on the base.I know a wizard who can rebuild almost anything. Thanks Link to comment Share on other sites More sharing options...
Guest Uncleshim Posted June 28, 2011 Share Posted June 28, 2011 I am interested in the following.4 barrel intakeFinned valley pan Finned valve coversHeaders/ZoomiesRear sump oil pan with oil pick up screenLet me know what you have.Thank you for your time,Uncleshim Link to comment Share on other sites More sharing options...
Guest 60electra225 Posted June 28, 2011 Share Posted June 28, 2011 Buick script mirror, with the 5 rings around glass ? Link to comment Share on other sites More sharing options...
Guest 40series Posted July 1, 2011 Share Posted July 1, 2011 I am interested in the following.4 barrel intakeFinned valley pan Finned valve coversHeaders/ZoomiesRear sump oil pan with oil pick up screenLet me know what you have.Thank you for your time,UncleshimPM replied Link to comment Share on other sites More sharing options...
Guest 40series Posted July 1, 2011 Share Posted July 1, 2011 Buick script mirror, with the 5 rings around glass ?no dice on that one. Link to comment Share on other sites More sharing options...
Guest 63wildcatwi Posted July 10, 2011 Share Posted July 10, 2011 I need a block and pistons for a 401 63 wildcat. do you have anything like that or even a complete motor Link to comment Share on other sites More sharing options...
Guest 40series Posted July 10, 2011 Share Posted July 10, 2011 I have a blocks with a complete rotating assembly. Block 150.00 pistons and rods (used) 50.00 plus applicable shipping Link to comment Share on other sites More sharing options...
Guest saz Posted November 30, 2011 Share Posted November 30, 2011 I am looking for exhuast manifold for a 1960 364 nailhead lasabre Link to comment Share on other sites More sharing options...
Guest 40series Posted December 1, 2011 Share Posted December 1, 2011 i have both sides available Link to comment Share on other sites More sharing options...
Guest throw48 Posted January 10, 2012 Share Posted January 10, 2012 do you have a timing cover for 65 401 nailhead ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now