Jump to content

1972 Chevy C10 Short Bed Hot Rod


Guest bchevy

Recommended Posts

Here's a Great looking and sounding, running and driving 1972 Chevy C10 Shortbed Fleetside Pickup. ,

350 engine supposed to have 6000 miles and be a 4 bolt main, .030 over, I have no other specs on the engine internals.

"Big" Holley dual feed double pumper 4bbl carb with no choke- Numbers on the carb. are: 4150, HP, LIST 80496, 1, 3533, 11848 primary jet body.

Edelbrock Performer dual plane intake.

New "O" ring style water neck on intake.

Billet brackets & pulleys with 2 serpentine style belts.

Chrome alternator.

Aluminum water pump.

GM HEI distributor.

New motor mounts & air filter.

Stock 4-row radiator with fan shroud

"Built" Turbo 350 with 3500 Stall converter. Shifts high and fairly hard.

New front Bumper.

Power steering.

Power disc brakes.

15" Weld Wheel Pro stars all around with M/T Sportsman Pro tires.

Front tires are 26x7.60-15LT

Rear tires are 29x15.50-15LT

12 bolt posi rear w/4:11 gears.

Nicely loud exhaust exits just in front of the rear tires.

Exterior color is '68 Chevy blue with white stripes.

Kenwood DPX440 am/fm/cd/casstte stereo with remote control RC110, speakers are in the doors.

Excellant interior, seat and door panels redone in matching blue and white.

Autometer Sport Comp Silver 10k monster style tach on left windshield pillar.

Bed is rhino (type) lined on the inside with carpet on the floor and sides.

Suspension has been lowered with blocks and coil over shocks in the back, not sure what was done to lower it in the front.

Good glass, Windows roll up and down nicely, Doors open and close nice, quiet, and solid.

LeCarra Steering wheel.

LED'S mounted under dash, in the engine bay, and under the bowtie in the bed for a nice glow at the car shows.

Consistent trophy winner and a constant favorite with the crowd.

Issues/Needs that I know about:

Front tires seem small to me, could use replaced with bigger size.

Steering wheel has no horn parts inside it

Carb. is too big and has no choke if you want better street use.

Scratch on drivers side wheel tub inside bed

Downshift cable not connected to carb.

Missing one parking brake cable on rear end

Gear shift indicator "cover" on steering column needs replaced.

Blinker cancel cam not working

Headers are peeling, may have used to be chrome.

Bed carpet could use to be replaced.

Nothing on this list is a big deal.

That's about all I know about it,

Located in Maryland, Email me with your questions!

No Shipping, No "Agents", No Flippers, No Lowballers, NO "CHEQUES" Come see, Come pay, Come take it away.

Seriously lopsided trades considered.

More pics by email.

$15,000

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...