Guest lvrpool32 Posted February 21, 2009 Share Posted February 21, 2009 Made a custom dash for my 63 and want to re-use my ignition switch. How do you remove it from the dash panel once the electrical connector is removed?cheersNick Link to comment Share on other sites More sharing options...
Dales90 Posted February 22, 2009 Share Posted February 22, 2009 Get yourself a paper clip and straighten it out.Put the key in the ignition and turn it to Accessory.Stick the paperclip wire into the hole which is lower left of the key slot I believe.Push the pin in, while turning the key as if going left past the accessory setting, ignition housing will release.Good luck.Dale Link to comment Share on other sites More sharing options...
Guest lvrpool32 Posted February 22, 2009 Share Posted February 22, 2009 thanks dale...worked great! Link to comment Share on other sites More sharing options...
Guest jriviera Posted July 13, 2009 Share Posted July 13, 2009 Nickworking on restoring my 63 Riviera.. looking for ignition switch removal.. thanks for asking.. it helped me too.. how's your riviera comin.. am located in DC and will have Riv running by Fall.. perhaps.. we can find you somewhere at a car show.. (ps .. replaced suspension.. new tighter springs, bigger sway bar, air shocks and bags supports (no it is not bagged..).. new disk brakes up front.. if you need any juju from what i have done.. lemme know.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now