Guest OLBUICKS Posted February 16, 2009 Share Posted February 16, 2009 I was greasing my 38 sedan last summer, I noticed one of the grease fittings was broke off on the lower control arm.. It seems as these fittings are not threaded in, I have a extra front end. Do I have to remove the nut that the fitting goes in and replace the grease fitting, or what to do? Thanks John Link to comment Share on other sites More sharing options...
jeff Posted February 17, 2009 Share Posted February 17, 2009 I would try drilling and tapping the disc that the old grease fitting was pressed into, then installing one from NAPA. The disc is soft metal and not too thick, all you need is a thread or two.If not, buy yourself a set of new bushings. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now