Guest imported_Pertti K Posted May 31, 2008 Share Posted May 31, 2008 Does any of them go in to the water pocket in the block? And if yes, which ones? My 303 is leaking coolant on the RH side close to the lower middle bolt, just above the exhaust manifold. Cylinder cement did help, but now that I'm about to change the coolant, I could put some sealant to the bolts.But if they don't go to the water pocket, I quess it's the head gasket leaking then. Link to comment Share on other sites More sharing options...
HarryJ Posted June 1, 2008 Share Posted June 1, 2008 Pertti K...The bolts should not go into the water jackets. Link to comment Share on other sites More sharing options...
Guest oldmobile1 Posted February 26, 2009 Share Posted February 26, 2009 Are you sure the head bolts are the problem, the exaust bolts do go into the water jacket, and need sealant. I always forget this ans have a leak. Doug Link to comment Share on other sites More sharing options...
Guest oldmobile1 Posted February 26, 2009 Share Posted February 26, 2009 Are you sure the head bolts are the problem, the exaust bolts do go into the water jacket, and need sealant. I always forget this and have a leak. Doug Link to comment Share on other sites More sharing options...
Guest imported_Pertti K Posted March 1, 2009 Share Posted March 1, 2009 Yes - that could be it. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now