Guest John1918 Posted April 27, 2008 Share Posted April 27, 2008 My Victory Six came with no engine splash aprons but I managed to get a pair at a swap meet. The left side apron fitted fine but the manifold side apron will have to have some alteration to accommodate the exhaust pipe and I still have a query about the side that bolts up to the engine. While the left apron has slotted holes the right side apron has three bosses with 3/8" holes and I'm unsure of why they are there. It appears the bosses effectively lower the apron by about 3/4 inch and leave a gap. Do I use three 3/4" longer sump bolts or is there some other way of fastening the apron to the engine? Cheers, John Link to comment Share on other sites More sharing options...
gundog99 Posted April 27, 2008 Share Posted April 27, 2008 could you post some pictures? Link to comment Share on other sites More sharing options...
Guest John1918 Posted April 28, 2008 Share Posted April 28, 2008 Attached are 2 photos, one of the boss and another of the apron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now