tbirdman Posted January 12, 2008 Share Posted January 12, 2008 On my 32, I put the distributor back on the car. I have tighten it down (3 screws on the bass and the clamp bolt). There seems to some movement in the distributor if you push it from side to side. Not a lot but some. I know the distributor was rebuilt just a few years because of excess play. I don't remember any movement when I took it off. I have the clamp tighten well, and the distributor won't turn.Is this normal? Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 12, 2008 Share Posted January 12, 2008 Is the movement at the base where it mounts to the head, at the rotor shaft only or is it between the base-adapter and the distributor? Could the adjusting plate and clamp be on Upside-down? Link to comment Share on other sites More sharing options...
tbirdman Posted January 13, 2008 Author Share Posted January 13, 2008 Looks like the movement is between the base of the distributor and the clamp. Link to comment Share on other sites More sharing options...
Guest imported_Speedster Posted January 13, 2008 Share Posted January 13, 2008 Sure sounds like the clamping plate is on Upside-down, to me ??? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now