philipk65 Posted October 7, 2007 Share Posted October 7, 2007 I have a '49 Ford F-1 with the original flathead in it. My question is what should I do about oil with this new problem with today's oil not having the right amount of zinc and phosprous in it (ZDDP)? Link to comment Share on other sites More sharing options...
19tom40 Posted October 9, 2007 Share Posted October 9, 2007 IMHO nothing. My reasons are that the flat-head engines are slow revving engines and there is not the extreme pressure on the valve train as there is in the more modern engines. A stock cam and lifters should last a long time with the low mileage and low stress on these engines.There were a series of articles in Skinned Knuckles last year on this problem. They are good reading and help explain why you should do nothing and what to do if you are still worried.Any oil that has an API rating of SL will have enough ZDDP to protect engines that are susceptible to cam wear. Oil made for diesel engines and some speciality oils meet these specs. Kendall GT-1 High performance oil is another oil that meets the SL specification. Link to comment Share on other sites More sharing options...
19tom40 Posted October 11, 2007 Share Posted October 11, 2007 I have been informed that STP has enough anti wear additive to replace the ones left out of oil with an API rating of SM Link to comment Share on other sites More sharing options...
philipk65 Posted October 11, 2007 Author Share Posted October 11, 2007 Thanks! Is that STP oil treatment? Link to comment Share on other sites More sharing options...
19tom40 Posted October 14, 2007 Share Posted October 14, 2007 Yes.Read the newest article in Old Cars Weekly about the new oils. Adding too much zinc can cause other problems.I would still do nothing and continue to use modern oil. Link to comment Share on other sites More sharing options...
bill pritchett Posted October 31, 2007 Share Posted October 31, 2007 Note, that the Mobil 10W30 conventional oil still goes back to SG as of today when I was in Walmart. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now