kaminski Posted July 16, 2007 Share Posted July 16, 2007 Need some info on this brass carbureto. was told it was off of a dodge. For those whose picture downloading is slow. go to http://www.hotrodders.com/forum/journal....ction=view#oops small picture on page Link to comment Share on other sites More sharing options...
Ivan Saxton Posted July 16, 2007 Share Posted July 16, 2007 I doubt if it is Dodge, which used Stewart mainly. At #1 size it is about 1" thoat size, which is much too small. L type were most often used on commercial vehicles, but probaboly too small for anything of that type. The B is horizontal suffix. Carbs of the early '20's have a pressed brass top on the float bowl, with a photo etched plate. Cast is probably in the teens. Demand is probably limited by small size. For instance a similar but larger OS2 horizontal carb bolts straight onto a T Ford Frontenac T ohv head inlet flange.Ivan Saxton Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now