James Czukor

Would anyone have the specs on the front fenders for a 31 Plymouth? Or can someone take a string and measure the length of the seam that runs the length of the fender? How many bolts to the running board and how many bolts to the body?\ Thank you, Jim czuk3@aol.com

I purchased a 35 Chevy Master and converted it to a street rod. The car was an original 30,000 mile vehicle. I have the following parts sell and would take $1500. for all. I am located in fair Play South Carolina Call John at 864 972 5743 Running Babitt 6 Cyl. air cleaner and horn still attached Trans Drive Shaft Rear axel with springs brakes, knee shocks Front Axel with brakes, knee shocks and springs Steering column with gear box Wide White - Firestone 525/550 x 17 Front and Rear bumper Fuel Tank Harrison Heater Tube box for radio Plus more

The part the screws into the radiator is 2" in diameter. Thak you, Jim

k you, I will continue to research. The thread count is 6 and the dog bone diameter is 8 1/4". Thanks for the impute.

Thanks for the response. Any info helps zero in on the year.Jim

Are the moto meters the same for a few years or are they year specific. I am attching a photo of the one I have. Thanks

I have 4 (no pairs)how is the best way to identify them? I'll post a few photo's of one of them.

No clue on year make or model. Any assistance or clue would help. They have a seam the runs the full length of the fender. Laying a string along this seam it is 68 3/4" long. There are only 3 holes on the body mount side. Thanks.

But Briggs made doors for a number of brands. These are 34 3/8" at the belt line and 42 1/2" tall. Any clue would help. Thanks

OK, I have no clue what this fits but I am hoping that soemone has a book. Any help would be apprieciated. Modine Serial number 26424, Model 1335 also has numbers 43691 and 9217 on it.

Part number on housing 60330-8. Any clue on what it may fit?

The oil pan is 25 3/4" X 12 3/8" Any clue what it may fit?

My book says "Circuit Board Inst. Panel 69-71 Dodge Truck Compact" But I must say I have never seen a truck with a 160 MPH Speedometer.

Do you have the Modine part number or measurments? I have a modine number 1335 serial number 26424. Its large. But its dated May 8, 1923. May 16, 1922 and Oct 24 1922. Other number on it were 43691 and 9217. It is 31" tall 20 1/4 wide. czuk3@aol.com

The only probelm is I don't know which body. Briggs made bodies for a number of different companies. They are 34 3/8" across the belt line and 42 1/2" tall. There are 3 hinges. From the top of the top hinge to the top of the door is 3 1/2" from the bottom of the top hinge to the top of the middel hinge is 14 1/8" and from the bottom of the middle hinge to the top of the lower hinge is 11 1/2". Now these number may be off an eigth or so but if you need exact, contact me. I am asking $350. for the pair and they are rust free. There is a small dent by one of the window frames. You can contact me at czuk3@aol.com

Decent Shape, Not show condition. It would need to be restores. The therometer works. This can be mailed within the US for 9.60 outside the US acutal postage rate applys. You can contact me at czuk3@aol.com Asking $150.00

No clue what it is to. I can box this up and ship it. Actual postage rate would apply. Asking $35.00 Contact me at czuk3@aol.com

I do not know the make and model. The dual mounts are located 35 miles north of Philadelphia. I am asking $500 for the pair. They have a seam line that runs the length of the fender. Putting a string along that sea line they measure 68 3/4". There are 3 bolt holes along the body mount side. Asking $550.00 contact me at czuk3@aol.com This is a cash and pick up only transaction.

For Sale -I have a pines winterfront it measures 20 9/16 x 24 7/16. I do not have the thermostsdt just the grill front. Asking $60.00 loacted 35 miles north of Philadelphia. Contact me at czuk3@aol.com

I have a lynite Bell housing number 60330-8 and I am trying to find out where it was used or what application it would have had. Can anyone help?

21-ML-112449-ML-<br /><br />Moved to Packard Forums! RWB

I have a Modine radiator that has a serial number of 26424 and a model number 0f 1335. The tag soldered over the modine tag was 43637/9217. The core is 26 3/4 x 19 1/4 x 2 1/4. The inlet housing has a part number on it. It is 65212. The pat'ds are May 16, 1922, Oct 24, 1922 and may 8 1923. . Any help would be apprieciated.

I have a lynite Bell housing number 60330-8 and I am trying to find out where it was used or what application it would have had. Can anyone help?

I thought so as well but A gentleman I know who sells pre 1930 Chrysler assured me its not 1930 and down. I have checked 31 and 32 and no luck.