jennyjett

1989 red/grey reatta. i bought it for an extra parts car...i'm now running out of room. im in cleveland ohio.

i just purchased a red reatta with grey interioir. i'm in ohio. ill check there condition. i'm willing to sell them

a completly rebuilt teves brake system. 1989 reatta. previous owner had 2...brake system taken out.

i have an 89 reatta without the abs unit. can i put a completly new riviera brake system in? also i have 2 other reattas, both red. one tan interiour, one blue grey, that i'll either fix up or part out if anyone needs anything. im in cleveland ohio.

i purched my third reatta. it's an 89 with only 69k on it. everything works but abs brake system was removed so car has no brakes right now. can i use a standard 89 riviera braking system?

does anyone know where else i might purchase the 3 bushings for my headlights beside ebay? I'm very cautious and i won't give my credit card info out to ebay.

Thanks everyone. is there a place to buy the bushings other than ebay? i don't like giving my credit card number.

1990 reatta coupe. 80k. white..garnett interior, white mouldings. Ok....here we go. My passengers side headlamp was only going up after hitting the light switch several times. I've read all the previous posts, so I decided to take it off the car and open it up and have a look. Well I don't really know what I'm looking at but I can tell you there was pieces of plastic everywhere. I cleaned everything out and re-installed it. Now the motor spins freely (it didn't always spin before) but the bellcrank(?) doesnt move at all. I believe there's too much slop in the arm that connects to the headlight itself. So...my motor spins freely but its not causing anything to happen. Do I need to replace those 3 bushing? do I need to purchase the connecting arm from Buick? I know if I read through a zillion of the old posts I would find the answer...but I'm new and need all the extra time I have for cruising. Thanks everyone, Jennyjett

hi. 91 allante. convertable. marroon w/ tan interior. both hard and soft top.

thanks for all of your input. i apologize for not writing sooner, but ive been doing so much work i forgot. the problems fixed. i kept pushing switch on and off...all of a sudden they worked!!! i took switch apart and cleaned it. they have been fine since. thank you all

heres a question for everyone. My Antenna only goes down till there is an inch left sticking up. It never fully goes all the way down. I also dont think it goes all the way up...but almost. maybe it should be going 2 maybe three inches higher. I've searched the site and could only find the asnwer to...what to do if it doesnt work at all. My question is, is there a way to adjust it? thanks

I don't know alot...but this may help. The Reatta service manual is availiable for use online. http://www.reatta.net/docs.html just register and the info your father and you need will be in a schematic there. good luck!

i used the mothers plastic polish. it did a GREAT JOB. Iv'e ordered the flight jacket plexicoat so ill let you all know how much it improves. thanks

i;m searching right now for a place i can purchase...Aero-Shell , Flight Jacket

well the car now looks like the day it was driven from the showroom! Except for that cloudy rear lens. I feel very fortunate that i was able to buy this car from my mother-in-law. She kept it sooo nice!! does everyone post pictures of their cars? I don't know wether I have an exceptional car or not. People sure do stop and look at it enough. All of you have been so helpful. Thanks again