[WTB 1931 Buick 90L limo]

Thanks Bill, I flew up to see that car. That wasn't the car for several reasons...

Regards,

John Fields

[WTB 1931 Buick 90L limo]

bump

[1941 Buick limo]

Hello Mike,

I would also like photos and prices when you have them available.

Thanks,

[WTB 1931 Buick 90L limo]

Looking for a 31 Buick Model 90L limo to restore. Might consider a Model 95 phaeton. Must be US made and assembled. Might consider other Flint built CCCA classic. Must be pre-war, in restorable condition. The more original the better. Any leads are appreciated...

Please email replies to fields.28@osu.edu

[WTB 1931 Buick 90L limo]

Looking for a 31 Buick Model 90L limo to restore. Might consider a Model 95 phaeton. Must be US made and assembled. Might consider other Flint built CCCA classic. Must be pre-war, in restorable condition. The more original the better. Any leads are appreciated...

Please email replies to fields.28@osu.edu

[1931 Series 60 Rear Brake Drum]

Hello Pat,

My father can help you out. Send me a private message and I will give you his contact information. He has two spare 1931 60 series chassis' and both have all brake drums intact.

He also has a couple original honeycomb radiators, a couple engines, a couple sedan doors, etc. He was considering building a 60 series old school street rod, but went another direction with that project.

[Set of 4 Packard 7 Lug 20 x 4-1/2 Disc Wheels]

A friend of mine is selling a set of 20's/30's Packard disc wheels.

Up for auction is a set of four (4) Clev Weld Disc Wheels, 20" x 4-1/2" SEVEN lug. Not sure of other applications, but used on late 20's to early 30's Packard. Production date of 9-29 is visible on one wheel. Pix show the very good condition of the front and back of wheels. The inside area ranges from very good to severely pitted, and only one of the stamping areas is mostly readable. Split rings are in good condition. Tires in the pix are worthless, unless you are looking for something to roll around the shop. Tubes have had the stems cut for ease of dismounting. Buyer to pay $80.00 for shipping. Pick-up possible in Columbus, OH area, but must be removed by the end of May.

See Ebay auction listing for pictures and to bid:

Set of 4 Packard 7 Lug 20 x 4-1/2 Disc Wheels: eBay Motors (item 190396835496 end time May-18-10 18:29:38 PDT)

[New wide whitewall tires 37, 38, 39 Packard 12]

A friend of mine is selling a new set of Lester wide whitewall tires for Packard model years 1937, 1938, 1939 12 cylinder models.

Tire size is 8.25 x 16

These are new tires still wrapped in paper.

Sale includes 5 new tires, 5 new tubes.

Buyer will pay actual shipping charges from Columbus, Ohio.

Below is the link to his Ebay listing for the tires.

Thanks for looking.

SET OF 5 NEW LESTER 825-16 WIDE WHITEWALL: eBay Motors (item 190397655205 end time May-22-10 06:14:54 PDT)

[Early LaSalle radiator shell]

Hello, do you still have the radiator shell?

My father is looking for one.

If you still have it, and want to sell please email

me at fields.28@osu.edu

[WTB 1926/27 Buick master exhaust manifold]

Need an exhaust manifold for a 1927 50 series (Master). An'y help would be most appreciated. I believe it has to be 26 or 27 master only. email me at fields.28@osu.edu if you have one to sell! Thx John

[Found in 1930 Buick Model 68 - Misc parts (Message 2 of 2)]

Part number 12 are caps which go over the sidemount locks pictured in your first message. When you turn the key the chrome cover is released allowing you to remove the sidemounted spare. Regards.

[1979 MG B convertible, needs TLC but worth it]

Hello,

I may have interest. Where is car located? Any visible rust?

Could you email me any additional pics? My email is fields.28@osu.edu

Thanks, John

[WTB 1927 Buick Master exhaust manifold]

Bump

[WTB 1927 Buick Master exhaust manifold]

Bump

[WTB 1927 Buick Master exhaust manifold]

Need a good used exhaust manifold for a 1927 Buick Model 51.

Can anyone help?

Please email at:

fields.28@osu.edu

If you can help-

Thanks in advance

John

[WTB 1927 Buick Master exhaust manifold]

Need a good used exhaust manifold for a 1927 Buick Model 51.

Can anyone help?

Please email at:

fields.28@osu.edu

If you can help-

Thanks in advance

John

[1925 Marmon D-74 sedan for sale]

Here is a link to a nice 1925 Marmon currently available on Ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=150317879249

[Wanted: Sears Highwheeler Headlamps...]

I too am looking for missing parts for my 1910 Sears. If you have any extras, please contact me. Thanks, John Fields

[chrysler convertible coupé 1931 8 cyl]

Hello, I don't have any Landau Irons, but I do have a set of 6 wire wheels with adjustable spokes for 1931 Chrysler. There are 5 snap rings with them. I bought them on Ebay thinking they would fit 1931 Buick, but they do not.

The wheels have been stripped and need restored with new spokes. The hubs are excellent with little or no pitting. The outer rims and snap rings have some pitting, but are in solid condition. If you have any interest, please let me know.

Thanks,

John Fields

[Barn fresh: 1930-1931 Buick sheetmetal]

I am interested in the fenders, hood, etc, and would consider taking all of the items if you could verify that the parts are 1930 60 series or 1931 90 series parts. I will be passing in the vicinity on my way to pick up a vehicle next Wednesday-