-
Posts
275 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by pphil
-
-
-
when i started i ran low 16's all stock 2.78 open rear(but did get up to 19 mpg on the interstate)
the converter dropped me down to 15.4
a posi carrier and dist re curve got me down to low 15's
a 1 inch 4 hole carb spacer a 175 degree thermostat and cool October temperatures got me to a 14.58 basically all stock
for a rear you need to find a 67-70 riv GS (these all came with a 3.42 gears)
you can take the carrier and gears out and install in your rear
i found mine for 500 on ebay bought the the whole car and parted it out
or build a custom ford 9 inch
scott
- 1
-
wow
i didn't know we were down to 67 members in the BPG
The Buick Club of America is proud to announce a new addition to our ranks. The Buick Performance Group is now officially the “Performance Division of the BCA”, complete with all the benefits and perks of BCA membership! We would like to formally welcome all 67 of their members into our family.
scott
-
More horsepower and less weight are obvious, but a 2.73 rear end is a pretty darn high ratio for drag racing. I'll bet the 3.5 will make a huge difference. Surprised you are not going for a 411. I assume you have a 3 speed automatic?
yep i got a turbo 400 trans
as for gears i dont think you can get 4.11 for the buick 9 3/8 big car rear
they did make some 3.90 sets but they are real rare
it took me 7 years to find a set of 3.42's
scott
-
well the nats are over
the wildcat ran very well
best et was 13.13
best mph was 103.9
average et was 13.20's
my last run i got a .006 light.......sadly on the red side........ but hey i was this close to a perfect light
next on my list is to remove the 2.78 gears(yes 2.78's)
and install the 3.42 rear add a new converter and shoot for the 12's.......
just to clarify
this wildcat is no longer stock
new engine
462 ci
10.15 to 1 compression
b4b intake
TA SE stage 1 heads
shorty headers
scott
-
very nice, especially with the weight. Are you into stripping the car down for a run?
just emptying the trunk
weighed the car today
4375 lbs with me in it
scott
-
at the GS nationals this week
my best so far is
car is pulling strong up to 5700rpms
hoping for more with the cool air on Saturday
just need to shave 14 more hundredths......................
12's would be sweet...........
scott
-
the 69-70 lasabre will also be a parts car
scott
-
Did you do anything with the pump? Mine wouldn't lay over until it was in second gear at around 4k rpms.
the only thing i have done is block off the return line
will have to take it out and see what happens
scott
-
well after some fine tuning
it is pulling up to 5500 smooth no popping spitting or sputtering
time to take it back to the track
scott
-
exhaust done
dynomax super turbo long case mufflers with 2 1/2 " duals out the back
went to the track
and i have problems..........
car went 13.84 but was cutting out / popping and cracking at around 4700 rpm's
never got a good run in..........
on a better note just got back from the BPG meet where i picked up a
9 3/8's big car 3.42 posi rear
huge thanks to Tom Wagner
scott
-
i heard about this yesterday at the BPG meet in columbus
roberta is a great person and i hope she gets well soon..................
scott
-
-
not mine
located in middle tn
i did go look at it
83 hot air turbo car
has posi tag on the rear
has buckets and floor shifter
http://www.golsn.com/listings/automotive/cars-trucks/passenger_cars/3970184.html
claimed it runs but leaks oil badly
scott
-
OH NO, what happened, Hope no one was hurt.
no one hurt ..............the chain gave way and the engine dropped onto the concrete floor
scott
-
Well I guess that will be too far to ship. You can look at v8buick.com.
no i cant look at v-8 buick as i am banned from there for a post on yellowbullet.com
well not banned i can read posts but to every other member i am on ignore, i can post but
no one can see any of my posts...............................
scott
-
i am in nashville tn
scott
-
well after an unloading mishap i need
oil pan(crushed)
pick up tube(assumed bent)
harmonic balancer with v belt pulley (didn't get with engine)
price shipped to 37210
thanks
scott
-
the engine was a 72 buick 350 4bbl (WB code)
it had been overhauled not rebuilt and never started
complete from carb to pan /flex plate to fan
only missing the harmonic balancer( he couldn't find it)
even had a alt and all brackets on it
the trans was a 68 400 turbo 400 long tail shaft that needs rebuilt
still a deal if you ask me
scott
-
nashville tn
scott
-
yes i received an email and will call him today
thanks scott
update will be going to GA. this saturday to pick it up
thanks again
scott
-
my lost dist has been found and delivered.............
scott
-
-
my re-curved dist got lost in the mail so i need a 455 dist.(points style)
for a 70 455
scott
stock 70 wildcat 1/4 times
in Buick - Performance and Modified
Posted
34 degrees all in @2300rpms