Todd H

sorry that went with the fenders todd

hi, is any one interested in free parts for pick up only in northern california from a 64 wildcat 4 door. i have all 4 doors complete with windows trim etc. body and frame less fenders and hood front seat, many mics small parts, drive shaft..1 rear bumper in poor shape (would need restor ) let me know or its off to scrap metal todd

i think there is just light rust is some areas just starting.. i can take some pics this weekend and send them to you...my e mail is aquascape@sbcglobal.net todd

i have a nice hood with bad paint , no dents that i was saving for a spare????make me a offer???it is in california car is a 64 wildcat..todd h

these are chrome and need to be replated..thaNKS TODD

hi, i too have a 64 wildcat convertible and have received lots of help from this and other sites...the 64 is a great year for the wildcat...good luck hi ray,, hi troy todd

hi my 64 wildcat rally wheels need new chrome... is it possible and has any on had it done??? how much should it cost and are there any shops in the norther california area that do it?? thanks todd h

where is the yard in richmond? i work in san rafael just across the bridge....todd h

i have a 64 4 dr that i am parting...email me what you need...i sold one of the fenders already...todd h aquascape1@msn.com

just wanted to say happy new year and thanks for the great tips, comments and fun from this forum...i am looking forward to another great year...and wish every one the same.. tohh h

hi i must get rid of my 4 dr in order to make room for another car or my neighbors will kill me...(cheap) .i have most of the car left ...no part is to small or large... let me know the part you need and make me a fair (good for you , good for me) offer for it and the part is yours plus shipping from 94954 or you can pick up the parts if your local...the more parts you need the cheaper they get....last chance all left overs are scrap metal thanks todd h

cars has it in their catalog part #FS-635 $133.75 EA www.oldbuickparts.com look in the 61-75 big car section under group #0 todd h

i just installed dual quads on my 64 wildcat 401ci convertible and want to install a power steering set up from a 65 or a 64 425 in order to make more room for the linkage and for a better look....has anyone done this????? if so what parts do i need??? i have a 65 pump and brackets but the pullys dont line up with the crank etc....i think ac plays into what type of pulley for the crank???...my car does not have air...thanks todd h

i installed some in the back of my 64 convertible that i bought from jc whitney...they have a vintage chrome look, were cheap enough and came with hardware and instructions...the instructions were basicly the same method as my 64 4 dr that had origonal dealer installed rear belts...todd h

awsome reply <img src="http://www.aaca.org/ubbthreads/images/graemlins/smile.gif" alt="" /> <img src="http://www.aaca.org/ubbthreads/images/graemlins/smile.gif" alt="" />

i have a 64 wildcat which i have taken tha tach out many times... the best and easiest way for me was to remove the console or at least loosen it... first you need to remove 2 screws from rear storage comp...bottom.... then remove 1 screw from trash / front storage area just below / infront of shifter... remove shifter nob by un screwing.... then lift the console from the rear first... make sure the p brake is on as the shift lever may move ... if you can reach the tach it is attached with 2 nut and a bracket from the bottom... it is much easier to remove the entire console and flip over... make sure to unplug / screw groung/ lead wires ....hope this helps todd

thanks for the info...todd

<img src="http://www.aaca.org/ubbthreads/images/graemlins/cool.gif" alt="" /> <img src="http://www.aaca.org/ubbthreads/images/graemlins/cool.gif" alt="" /> i just bought a year/part # correct dual carb and intake setup.... i want to put it on my wildcat convert.. it is a 401 ..my question is will it work and what other things need to be changed or tuned diff...thanks todd

i have a 64 wildcat convertible that i have taken 95 % apart and finally after 3 years finished it. (i entered it in its first car show this weekend and took home a trophy. over the years i have bought a few parts from a 63 that worked but were not correct for the year by part number...most of the sheet metal is diff and the lights and grill are not the same some interior parts will fit but are not the same look /year correct..the dash is almost identical and fits both years...the wheels/rims are the same...thats all i know... i am sure someone with a 63 may know more... good luck todd

hi, thanks for the replies....i entered my car in a local show this weekend , my first ever and took home an award....very cool....my car has the same set up with the spring etc and the base goes over the spare with a locknut to hold it in place... what i can't figure out is where to keep the cradle or load member and the tire iron...i got a fax showing it going with the base over the rim but the bolt is too short.... the tire iron seems to stay in place with the spring alongside the jack...thanks again todd

hi, i just finished restoring my 64 wildcat convertible and will show it at a local car show tomarrow....my very first show.....i am trying to figure the proper method of storing the jack in the trunk.... does anyone have pics or know how??? i think i have all of the parts...i just can't find a good home for the tire iron and cradle....

the one is blue with a few cracks...i will check in the morning to see for sure...todd

hi, i am considering parting a 64 4 dr wildcat that is currently complete and running..... i need a few parts for my convert...but 99 % could be avail... i will only part if there are enough people interested in parts... or the entire car.... post or email your requests.. i have ads in several locations so its first come first serve.. thanks todd

hi, i just listed a 1964 4 dr hardtop buick wildcat.. on ebay... item number 2400784065.. there are pics and description listed on ebay...it is $300. with no reserve...it runs and drives but needs a complete restoration...if it doesn't sell my neighbors and wife are having it towed when i go to work...it needs lots of work but has lots of life still in it... please save from the crusher..... todd