[1955 Dodge engine/tranny]

I have to move this engine now and have no place to put it. If nobody is interested, I am going to have to scrap it today.

 

[1955 Dodge engine/tranny]

Well, the engine won’t turn over. I guess it is just junk at this point?

[1955 Dodge engine/tranny]

Ok I found it!!

 

[1955 Dodge engine/tranny]

I will check for a number again today and see if the engine turns over.

thanks

[1955 Dodge engine/tranny]

This is embossed on the right side head in the center above the exhaust manifold 

[1955 Dodge engine/tranny]

On the right side of the block in front of oil filter there is an upside down 792

[1955 Dodge engine/tranny]

I haven’t been able to find any numbers on the block but the water pump crossover has a number embossed on it is 1329277-4 and J135 which looks like it was cast onto the part with screw heads and all.

the intake manifold has a number embossed on it which is 409375-6

 

That’s all I have found so far.

 

 

[1955 Dodge engine/tranny]

Close to Chattanooga Tennessee 

[1955 Dodge engine/tranny]

Thanks for the information!
Do these engines have a date code stamped on them? I have looked for it on the block but not sure of exact location. I have to do something with it soon but not sure how and where to market it so it can be seen.

thanks again,

Robbie

[1955 Dodge engine/tranny]

I have what I was told is a 1955 motor and transmission. The valve cover says Red Ram on it. I would like to sell it but am not sure on a price. I know nothing about it. The guy I got it from has passed on. Not sure if it turns over but it seems to be complete.

I don’t want to junk it, I am sure someone needs it. 
 

thanks for any help,

Robbie

[1909 Model T Timing Gear Cover]

Looking for an original 1909 Timing Gear cover.

 

 

[Model A parts at Hershey]

Headed to Hershey. Anybody got any nice straight Model A 19 in wheels?

also looking for 31 Cabriolet 68b parts?

email me:

mwtj22@yahoo.com

[31 Model A Cabriolet wind wings]

Do you have a picture of your wind wings? It looks like the ones in the catalog are for a roadster....

[31 Model A Cabriolet wind wings]

I am looking for a set of 1931 Model A Cabriolet 68B wind wings.

thanks for any help.

[1931 running boards]

I am looking for a set of 31 Model A running boards

thanks for any help.

[1930 Model A Ford Roadster Door Hinges]

I am looking for a set of original hinges to fit a pre August 1930 Roadster. These have a total of 4 holes per hinge (2 on door and 2 on body)

thanks for any help.

[Stewart model 11 speedometer]

I am looking for a Stewart model 11 speedometer if someone has a good one they want to sell

thanks

[Help Identify This Emblem]

Sorry guys, here is the whole thing. It also has a ribbed beauty ring but I am not sure where it is right now. I think maybe 1948?

[Help Identify This Emblem]

I have a hubca and have always wandered what car it went to. Think you guys could pinpoint it for me??

[Dayton Wire Wheel parts]

I have some Dayton wire wheels and need some hubcaps, rear hubs and a wheel center. Does anyone have anything for sale? these are the pin drive type for a model t ford. Thanks in advance for any help. Also who is good to lace them up with new spokes?

[Pilot Kerosene tank? Steam car?]

What does this fit? It is made of brass 8" X 24" with a gauge.

[Brass Kerosene Pilot Tank steam car]

Can anyone tell me what year did Stanley or White steam cars used a Brass Kerosene tank with a Boston auto Gage?

[Brass Kerosene Pliot Tank steam car]

here are a couple f pictures of the tank that is 24" X 8"

[Brass Kerosene Pliot Tank steam car]

Can anyone tell me what year they used a brass kerosene Pilot tank on the Stanley steam cars with the Triumph Boston auto gage?

Thanks

[Bob Cole]

Can anyone tell me how to get in contact with Bob Cole? he makes jack handles for old jacks.

Thanks,

Robert

15t(at)bellsouth.net

replace the (at) with an @