packard 116

I have to move this engine now and have no place to put it. If nobody is interested, I am going to have to scrap it today.

Well, the engine won’t turn over. I guess it is just junk at this point?

Ok I found it!!

I will check for a number again today and see if the engine turns over. thanks

This is embossed on the right side head in the center above the exhaust manifold

On the right side of the block in front of oil filter there is an upside down 792

I haven’t been able to find any numbers on the block but the water pump crossover has a number embossed on it is 1329277-4 and J135 which looks like it was cast onto the part with screw heads and all. the intake manifold has a number embossed on it which is 409375-6 That’s all I have found so far.

Close to Chattanooga Tennessee

Thanks for the information! Do these engines have a date code stamped on them? I have looked for it on the block but not sure of exact location. I have to do something with it soon but not sure how and where to market it so it can be seen. thanks again, Robbie

I have what I was told is a 1955 motor and transmission. The valve cover says Red Ram on it. I would like to sell it but am not sure on a price. I know nothing about it. The guy I got it from has passed on. Not sure if it turns over but it seems to be complete. I don’t want to junk it, I am sure someone needs it. thanks for any help, Robbie

Looking for an original 1909 Timing Gear cover.

Headed to Hershey. Anybody got any nice straight Model A 19 in wheels? also looking for 31 Cabriolet 68b parts? email me: mwtj22@yahoo.com

Do you have a picture of your wind wings? It looks like the ones in the catalog are for a roadster....

I am looking for a set of 1931 Model A Cabriolet 68B wind wings. thanks for any help.

I am looking for a set of 31 Model A running boards thanks for any help.

I am looking for a set of original hinges to fit a pre August 1930 Roadster. These have a total of 4 holes per hinge (2 on door and 2 on body) thanks for any help.

I am looking for a Stewart model 11 speedometer if someone has a good one they want to sell thanks

Sorry guys, here is the whole thing. It also has a ribbed beauty ring but I am not sure where it is right now. I think maybe 1948?

I have a hubca and have always wandered what car it went to. Think you guys could pinpoint it for me??

I have some Dayton wire wheels and need some hubcaps, rear hubs and a wheel center. Does anyone have anything for sale? these are the pin drive type for a model t ford. Thanks in advance for any help. Also who is good to lace them up with new spokes?

What does this fit? It is made of brass 8" X 24" with a gauge.

Can anyone tell me what year did Stanley or White steam cars used a Brass Kerosene tank with a Boston auto Gage?

here are a couple f pictures of the tank that is 24" X 8"

Can anyone tell me what year they used a brass kerosene Pilot tank on the Stanley steam cars with the Triumph Boston auto gage? Thanks

Can anyone tell me how to get in contact with Bob Cole? he makes jack handles for old jacks. Thanks, Robert 15t(at)bellsouth.net replace the (at) with an @