Stude7

Question, does anyone know who makes a bug screen for the 1937 grilles. Or do I make my own.

I'm going to rebuild my own Trico, I ordered a kit for it. I am interested in the little phenolic clips like the picture shows. Would you sell a couple to me. I can't send personal messages yet. I don't have enough credit here yet.

I'm looking to rebuild my Trico vacuum wiper motor on my Dictator. Any recommendations on who or where to buy a rebuild kit would be appreciated. Thanks.

You're right, I didn't look far enough down the part numbers. Thanks. Someone should have a right front vent handle for a '39 to '46 Champion in a bucket under a bench somewhere. A little pitting doesn't matter.

I'm in need of a right side (passenger side) vent window handle for my '37 Dictator. I believe the part number is 265476W . Some pitting is alright, does not have to be perfect.

1937 Dictator glove box lock update. I drilled a 1/16" hole 21/32 from the face of the lock cylinder. Pushed the spring-loaded tab that was showing and pushed out the cylinder. Thank you everyone.

Thanks for the information, I'm going to try it on the glove box lock. 21/32 from the face, drill a small hole. I have an old key collection and found one that will turn the lock cylinder if I wiggle it just right.

Anybody know where to drill the access hole for removing the lock cylinder from the glove box knob. It's from my '37 Dictator.

Looking for good used glove box hinges for 1937 Dictator.

Stromberg EX-23 carburetor and oil bath air cleaner. The carb looks ruff but choke, throttle and float are not stuck. Good for a rebuild. The oil bath air cleaner is in very good condition no rust out, just surface rust. Small dent on the top. Filter element is nice and clean. $100 Shipping extra.

Just started parting a '37 sedan, I have the window garnish moldings, doors, rear glass and back glass. Surface rust, no holes.