RedSky455

SOLD.

The 7029240 is SOLD. Down to the 7028244. Complete carb, core condition ready to rebuild, or bolt it on now and run it (I did) $89 shipped in the lower 48.

Bumperino. The 7042240 has been sold. The 7028244 and 7029240 (for 1968 and 1969 Buick 430 respectively) are still available. $89 shipped to the lower 48. APO/FPO, Alaska, Hawaii, the Territories and most of the People's Republic of Canada are also available but shipping may be extra. Just PM me your location.

Bump. The 7029241 081 750 cfm for '69 430 AT is SOLD. Other three carbs still available.

ttt

ttt Weekend special: $99 for the 7042240 800cfm, $89 for any other, shipping included anywhere in the lower 48.

TTT. Looking to move these this week. Lowering price to $400 plus shipping. PM with your zip code for a quote. I get USPS commercial rate, typically 15-25% cheaper than the walk-in rate at the post office.

Bump. Lowering price to $125 / best offer any carb.

SOLD.

TTT still available.

TTT the two 802's are still available. Make an offer, shipping is approx. $125 the pair to the other coast from SoCal.

TTT still available, make an offer. Approx $40 shipping to the other coast from SoCal.

TTT still available. Make an offer. ~$225 ships to the other coast from SoCal.

Done and thanks Chuck!

The 853 and steelie are SOLD. The pair of 802s is still available. $150 plus shipping from 92117. PM me for an estimate; I get a commercial rate for USPS ground.

ttt

ttt

ttt

Have the following in core "ran before removal" condition. Available cast numbers and photos follow: 7042240 MB 21417 800 cfm for a '72 455 AT SOLD 7029241 081 750 cfm for '69 430 AT SOLD 7028244 3043 750 cfm for '68 430 AT LAST ONE! 7029240 MD 750 cfm for '69 430 AT SOLD Asking $150 $89 + shipping shipped to the lower 48. More pics available.

Hi Chuck. They are not correct for pre-71 cars. BUT. They will fit and work on a '69 Riviera (I had one and just sold it) but these wheels have the 2" center hole, vs the 2 1/8" centers that came on the pre-71 big cars - LeSabres, Electras Rivieras and Wildcats. So, the turbine style script "R" center caps that came on the Gen 2 Rivieras will not fit unless (maybe) you modify the cap clips (but I've never tried this). Also, believe the offset is a bit off from the pre-71 style, - like 1/8" or maybe 3/16" but I'm not sure; nothing radical. The good news is they will accommodate disc brake calipers if a conversion is in the offing for you. If you'd prefer year correct, I do have a nice pair of pre-71 shallow (drum type) and one of the deep dish (disc or drum) available in another ad on this site and over on V8Buick if you're interested. Just let me know. Erik

Very good driver condition 15x6, 5x5 bolt pattern chrome rally / road wheels for B/C/E big cars - Electra, LeSabre, Riviera, Wildcat. 1967-70 period correct but they should work on 64 and up. One pair of shallow dish drum brake wheels with the 2 1/8" center. Series 802. $150 the pair. One deep dish drum or disc also with the 2 1/8" center. Series 853. $75 SOLD One 15x6 / 5x5 steelie, good for a spare or if your car proudly rocks standard hubcaps or the poverty dog dish ones. Free with either / both choices above. $25 plus shipping on its own. SOLD All four wheels for $200 plus shipping from San Diego 92117, or pick them up locally for free. More pics available (PM me). Other parts available and ads coming. Thanks for looking.

This would be very, very handy if you can post the table or the link to it here or somewhere on the forum. Hope you find what you're looking for; getting to be slim pickin's out there....

Set of 4 driver condition chrome wheels, fitting the '71 and up B/C/E series "big" cars, i.e. Centurion, LeSabre, Electra 225 and Riviera. These apparently came from a '76 LeSabre and are marked as such on the inner rim surface (under the tire). Many people refer to these as "15x7" but they are all stamped '15x6 JJ' because they measure 6" between inner bead surfaces. Outer to inner rim edge distance is 7" as you would expect. Two come with period correct center caps (not Riviera 'R'). See photos. More are available on V8buick.com in the for sale section there or I can send you some as needed. Good driver condition, shine up very well with very light pitting, scuffs, and minor surface rust in the usual locations. No peeling chrome. The lug bores are all intact, ready to run on your favorite tuna boat today. Price is $455 firm for the set of 4, plus shipping from San Diego 92101 (PM me for a quote). Not interested in breaking up the set. I also have a plain Jane steelie available as a spare which I will be happy to throw in for the shipping. Thanks for looking!

I have a set of 4 from a '76 LeSabre. Good driver quality. Straight but with some surface rust and scuffs in the usual places. $455 plus shipping from San Diego area. PM if interested. EDIT: per RIVNUT's explanation below these are the standard 15x6 / 5x5 code JJ (see additional photo) from the factory. Outer edge to edge would be 7". Bead to bead is 6". Suspect OP knows that, but just want to be clear. These are factory big car wheels.