Derek56
-
Posts
73 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by Derek56
-
Ok cool I’ve put a layer of sealing tape on and it has stopped it at the moment will look into a Better fix later thanks
-
Hi did you get a chance to see if that shaft cover was in the kit cheers
-
Yes the gasket is there and has a light sealant on it. The oil is definitely coming from the area as shown below
-
Going to drive it on Sunday to a car show see what happens I can cope with a small drip for a while then see about cap if you think it will do the job if not it will be sealant. At least I can use it without a big puddle 😂
-
The garage sealed it up last night I drove it this morning didn’t leak first drive and when I took it to it’s storage place it’s now leaking a small bit around the sealent 😢 do you think the box will have to come out for the 4th time to fit the seal ?
-
Cheers for that info will be sealing this morning 👍
-
Would this kit do
-
Failing that i will be looking for a recon gearbox not likely to find one in uk
-
No oil was passing to the clutch area nothing in the inspection area we Went through all the gears on the lift no oil came out till it was driven under load see attached where oil comes from thinking of sealing it
-
We went through the gears inc reverse an number of time when on the lift it only seems to do it when driving
-
I will speak to the garage tomorrow
-
When the gear box is filled and go through the gears on the lift no oil comes out untill it’s been driving around
-
It’s 100% coming from the center of the front of the box we can see it coming out 😢
-
We have just drained it all out 1 1/2 pints were in we have just put in 7/8 pint and it’s still peeing the oil out 😢
-
Just going to test drive with 7/8 pint in it’s not leaking on the lift having gone through the gears so fingers crossed
-
Oil is out there was 11/2 pints left in it has 6 bolts on the top 🤔
-
Will pass this on to the garage thanks
-
Fingers crossed thanks
-
Draining tomorrow and measure fingers crossed
-
Where did you find the oil measurements as all i can find is on hometwonbuick saying its 2 pints and top up to filling hole 😢
-
So i think its a 46
-
Any idea what model mine is40 or 50-60
-
-
How much oil should be in gearbox the garage has been topping up to the filling hole has it been over filled ?
-
Any ideas where to find a decent gearbox there will be nothing in the uk failing that it’s a different box and axle or a auto box conversion
