-
Posts
286 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Selim
-
-
-
-
-
-
we are now testing the engine after overhaul. how many gallons should i use while engine is still in the car (idling) before taking it for a test drive after overhaul? is there a specific number of gallons to be used before moving the car?
-
35 minutes ago, avgwarhawk said:
It appears to be running very well. Good job!
thanksby the way, I highly appreciate your help. U r always helpful and save me all the time 👍👍👍
-
-
-
On 2/3/2021 at 1:34 PM, avgwarhawk said:
Holes are under on the bottom. There is wire meshing visible.
Now I need to try the engine overhaul. Need to idle it and let it run for few hours to test success of overhaul. Can not get oil cap with breather at the moment. Could I let the engine run with a screen cloth like in pics without oil cap? Or could I use the current oil cap that I have which does not have breather risking dirts and debris go back to engine ? Opinion please?
-
Now I need to try the engine overhaul. Need to idle it and let it run for few hours to test success of overhaul. Can not get oil cap with breather at the moment. Could I let the engine run with a screen cloth like in pics without oil cap? Or could I use the current oil cap that I have which does not have breather risking dirts and debris go back to engine ? Opinion please?
-
-
8 hours ago, avgwarhawk said:
It look like it will work but the end with the hole for the rod to protrude should have two of these so to surround the metal arm that is attaches to. The clip is a carburetor linkage clip. You should have one on your carburetor and can see how it is installed. Not knowing the diameter of your linkage rod perhaps a kit with various sizes is best.
8 hours ago, avgwarhawk said:It look like it will work but the end with the hole for the rod to protrude should have two of these so to surround the metal arm that is attaches to. The clip is a carburetor linkage clip. You should have one on your carburetor and can see how it is installed. Not knowing the diameter of your linkage rod perhaps a kit with various sizes is best.
they seem to be a bit bigger! is there a specific one that is made for my transmission? i mean a part in Bobs or something that surely will fit? cos i am overseas and by the time i order and if it is wrong, it takes forever to reach me here! thanks
-
-
8 hours ago, avgwarhawk said:
Check at the very bottom of the page. I see what looks to be a clip. Labelled G.
https://www.hometownbuick.com/1955-buick-variable-pitch-dynaflow-transmission-maintenance/
What is its name exactly? Want to order it but don’t know the name in order for me to buy it from Bob’s !
-
Can anyone send me a link of this retainer to buy from Bob’s , fusick or any shop? the ones here in the market are either too short or too long! I just don’t know what to buy exactly and confused on the sites. Million thanks guys, u r of great help👍👍👍👍
-
40 minutes ago, avgwarhawk said:
I would think a cotter key if there was a hole drilled at the end of the rod.
No holes at the end of the rod which is driving us mad! We don’t understand how should it fit and be kept in place! -
45 minutes ago, SpecialEducation said:
Is there a hole or groove in the end?
No holes at the end which is driving us mad! We don’t understand how should it fit and be kept in place!
-
16 minutes ago, avgwarhawk said:
I would think a cotter key if there was a hole drilled at the end of the rod.
Don’t understand ! What am I supposed to do with a cotter key?
-
7 minutes ago, old-tank said:
Check your service manual which details how to address that problem.
Don’t have one at the moment
-
3 minutes ago, SpecialEducation said:
Is there a hole or groove in the end?
As shown in pics
-
-
-
-
parts for C10 Apache 1961 truck! HELP needed
in Chevrolet & GMC - General
Posted · Edited by Selim (see edit history)
looking for places to buy spare parts, accessories and items for my C10 Apache 1961 truck. i only came to find brotherstrucks but need more places like Fusick, Bobs automobilia for buick. want a comprehensive place to buy all parts especially emblems, knobs, steering wheel ...
https://www.brotherstrucks.com/