[FS 1933 34 Dodge Plymouth coil ignition switch]

Do you still have these ignition switches?

If so I am interested!

 

[How to ID this car]

Thanks for the tips absolut the Dodge Story. I bought it 😀.

I have a Dodge DR two doors sedan from 1934. My plan is to restore the car as it came from the factory.

I believe it’s a DR and not a DRXX but I am not sure.

[How to ID this car]

Hi, I understood that you identified the car as a DRXX. I assume you might know what's the difference are bwtween DR and DRXX. The only documentation in this topic I found so far is this, https://www.hemmings.com/stories/article/1934-dodge-drxx-dr-and-ds not sure it's correct. 

I have looked in to the part catalog as well but still have a hard time figuring out how you know what's what.

I know the engine size are different but what else?

[1933 1934 PLYMOUTH PARTS TO HERSHEY]

Do you have some pictures of left & right front window chrome window with vent window frames from a Plymout 1934? 34

[Dodge running board supplier experiance]

I am trying to find some one that could provide me with running boards to my Dodge 1934 DR. I have found 

Ram restoration, https://www.ramreproductions.com/ 

They have a complete set with both the metal part as well as the rubber part. Anyone having experiance from their running boards?

Anyone knowing some alternatives?

 

[1933-34 Dodge Mopar TANKS Oval Gas Tank New]

Do you know if it fits a Sedan or Coupe?

[Dodge 1934 DR bumber brackets]

Anyone having a photo of front brackets for a Dodge 1934?

Need to build a pair.

[1936 Dodge ge Ute Dashboard Removal]

It's quite east tasks. There are some bolts, cables, wires and glow box that you have to release and then the dashboard will be loose.

 

[Dodge 1934 Wire Diagram]

It would be very helpful if someone knows where I can find a wire diagram for a Dodge 1934 DR.

 

[1934 hubcaps]

What size are you looking for? Wire rims or ?

[1934 Dodge steering]

Rare parts have stuff to these, https://shop.rareparts.com/search?year=1934&make=DODGE&model=DELUXE

 

 

[FCRC Macine]

No I hasn't been successful at all. Mid last week I sent an email to the address you proposed. Not answer yet. Also tried their facebook page, messenger and their website.

[FCRC Macine]

I have sent the Shaun an email so I will wait a couple of days for his replay.

[FCRC Macine]

I bought them directly from the FCRC site.

Was it a long time since had contact with them?

[FCRC Macine]

Thanks for the contact info!

I bought some front suspension parts to my Dodge -34. It’s Rare product. I understood that they are a reseller for Rare products. Shaun is he running FCRC Machine or what role do he have?

[FCRC Macine]

Hi, 

Anyone having any experience from dealing with FCRC Machine, http://fcrcmachine.com/

Bought some stuff from them, haven't heard anything from them since then.

[Dodge 1935 v.s 1936 frame]

Thanks for all response! The issue for me is to find a fram living in Sweden. I have after some detective work found a frame from .-35.

Would it be possible to find a fram from -36 in US?

[Dodge 1935 v.s 1936 frame]

Hi,

Anyone knowing the difference between car frame from Dodge 1935 v.s Dodge 1936. I have a Dodge -36 coupe. I plan to buy a Dodge frame from -35. Will it fit? I know that font cross member in the front is different but otherwise? 

Regards,

Magnus

[1934 Dodge]

Maybe you already solved this. If not it should be driven out by hand. Alternatively you take the not out on the other side if you have done that. Somet time the pin screw comes out at the same time.

 

[For Sale - 1933, 1934, 1935 ?? Dodge Ram Hood Ornament]

I am interested!

[Parts to Dodge 1934]

I am looking for some parts to my Dodge.

• Front and rear bumper
• Bumper guards and bolts
• Tail Light for passenger side, driver side might be interesting as well
• Ram ornament
• Chromed grill shell
• Horn trumpets

 

[1933 DODGE DP SIX 1953 ENGINE - T5 SWAP HELP]

On 9/13/2018 at 11:01 PM, billorn said:

What did 1953 Dodges use? Did they have a transmission with overdrive?

I believe there was a R10 transmission 1953 which was with overdrive. They did not use  floor stick. I have one in my Dodge coupe from -36. It was just bolt in. Only issue was to transform it to floor stick. If you can find one I would recommend it. I never took out the engine.

[Dodge 1934]

Thanks, I know that the fabric isn’t correct. I believe it was done in the 70s based on the cars history.

I haven’t been able to find any photos of the front seats. I believe it should be bucket seats in a 2-doors sedan, which is different compare to 4-doors sedans and coupes. I am not sure.

I plan to redo the upholstey. 

Out of that what material and color was used at that time and what pattern, buttons etc was used.

[This car and parts are on hold. I can not get a hold of anybody.1936 Dodge Coupes and parts for sale]

Have you got an suction date?

[Dodge 1934]

I just bought a Dodge -34 2-doors sedan. Do some one having a picture of the front seats? I believe they are different compared to 4-doors sedan and coupes.

I just want to understand if they are original  or not. Here is a photo of my front seats.