[Crank Hole Cover - Identification]

Keiser any idea of make and year for this bumper mount crank support?

[Rad caps - Identification]

Bingo!

I just went to Dr Google and looked at a few photos and I concur!

Thanks Keiser

[1938 Fargo Truck Crank Hole Cover Part #585971]

Yes that was an oversight on my part and thanks for pointing that out. I will change the ad. I would think the casting is the same for Dodge and all it would need is the "CLOISONEE" Dodge badge and it could be used on a Dodge.

 

[Crank Hole Cover - Identification]

That makes sense to me. Thanks for providing that comment. Any idea of make and year?

[Rad caps - Identification]

That very well could be. I don't know about botched but I concur that it could be a 35 Chev cap and the Eagle that is supposed to be on them could have been compromised and it was cut off at the base.

 

[Crank Hole Cover - Identification]

Can anyone identify this crank hole cover by make model and year.

No markings on bottom side.

Had one bolt to fasten. Missing.

May be a repop but very nice if it is.

thanks,

[Rad caps - Identification]

Can anyone identify make model and year of these rad caps?

Can't find any part numbers on bottom side.

thanks,

[1935 Chevrolet Truck Headlight Lenses and Chrome Rings - Twilite Chevrolet]

1935 Chevrolet Truck Headlight Lenses and Chrome Rings.

Original Twilite Chevrolet parts.

Lenses are perfect no chips or cracks.

Rings are perfect no dents.

S500.00

Will ship anywhere.

[1938 Fargo Truck Crank Hole Cover Part #585971]

1938 Fargo Truck Crank Hole Cover Part # 585971.

Very nice condition.

Some small pitting on front that should clean up with an SOS pad.

Backside and clip are near perfect.

Could be used for Dodge with addition of a "CLOISONEE Dodge badge".

Will ship anywhere.

$1,500.00

 

 

 

 

 

 

 

[1934 Dodge Pickup Hub Caps for Wire Wheels - Wanted]

Looking for a few 1934 Dodge Pickup hub caps for wire wheels with 6" ID.

Thanks

[Headlight Identification]

Thanks for responding Bob.

There is no makers name or stamps or part numbers anywhere on or inside the bucket that I could find.

I agree a great headlight for a Hot Rod.

It just may be an aftermarket headlight.

It was on a 35 DB when I bought and then replaced these with correct ones.

I will see if anyone else on here can provide any intel on it.

 

 

 

 

[1934 Plymouth Locking Hubcap]

1934 Plymouth Spare Wheel Locking Hubcap - $125.00

1934 Plymouth Standard Hubcap $100.00

 

I have several of each and also other years.

[Headlight Identification]

Can anyone identify these headlights for me by make and year?

Note the park lights on top.

Park light lenses were missing so made two out of clear tube that looks ok from 10'.

And of course they have 6 Volt sealed beams.

 

thanks,

[Wheel Caps]

Thanks for the ID and year on the fancy "C" cap.

[Wheel Caps]

Ok thx for that. 

 

I am thinking the other one is a "D" on the red one.

[Wheel Caps]

Cab someone confirm the year of the DB cap - 1918 ?

And year and brand / make of the other two caps - Packard ?

And value per cap.

Thanks,

[1935 Dodge Brothers KC 2nd Series Bench Seat]

Complete seat and frame located and getting shipped.

Fingers crossed.

 

 

 

 

[The Yardbirds - Jeff Beck passed away.]

Hot Rod Honeymoon

RIP Jeff.

[1935 Dodge Brothers KC 2nd Series Bench Seat]

I will scope that out.

thanks mark.

[1935 Dodge Brothers KC 2nd Series Bench Seat]

If you know anyone in your circle in Or who has one let me know!

Have Truck Will Travel..

Thx

[1935 Dodge Brothers KC 2nd Series Bench Seat]

The seat for 33 to 36 should be the same.

The problem is I can't find one for any of those years and no trucks of that vintage in my neck of the woods to compare.

I have looked at after market seats that they are a fit but not sure what the fit would be like.

I am reaching out far and wide for a stock seat.

Not sure what the people who rodded them did with the original seats but I am sure there are one or two out there sitting in the shop rafters.

i will keep you posted.

[1935 Dodge Brothers KC 2nd Series Bench Seat]

Does anyone have a bench seat back and bottom for a 1935 Dodge Brothers KC 2nd Series?

I don't care from where I will pay the freight if you can package it up.

Does not have to be perfect but good enough to upholster and can just be springs.

Also can anyone confirm the years that these seats are the same?

i believe they are the same for 33 to 36?

thanks

[1935 Dodge Brothers KC 2nd Series Bench Seat]

Does anyone have a bench seat back and bottom for a 1935 Dodge Brothers KC 2nd Series?

I don't care from where I will pay the freight if you can package it up.

Does not have to be perfect but good enough to upholster and can just be springs.

thanks

[1935 Dodge Brothers KC 2nd Series Bench Seat]

Does anyone have a bench seat back and bottom for a 1935 Dodge Brothers KC 2nd Series?

I don't care from where I will pay the freight if you can package it up.

Does not have to be perfect but good enough to upholster and can just be springs.

thanks

[Best site to sell a classic car]

As mentioned above check out BAT Auctions.

I recently sold a 70 1/2 Z28 and got what I needed.

Just in the process of doing another one.

I have had good luck with Cars on Line and they advertise until the vehicle is sold or you delete the ad.

And CL has worked for buying and selling.

You can do a search for a specific title that goes into their whole platform.

Kijiji works as well. ( CAD only I think but does the whole country)

I sold a 1942 Dodge pickup to a guy in France on Kijiji.

Also sold one of my LS6 cars here as well.

It is amazing how many people globally are scoping out cars.

And of course AACA is a great venue and has real buyers of all brands. ( globally)