27esx33t8

I have a 21 Olds that was a touring car that is a rolling chassis. It has been is a storage shed since the 60's and it has a lot of stuff piled on top of it so it would be a big job to get a pic of it. Also have the remains of another one that has been outside for many years. I live in Massachusetts.

Is your Essex a roadster or a Boattail Speedabout ? If it is a roadster it may be custom bodied in Australia. Does your windshield fold down? If it does then it is different then a factory built Essex body,as mine does not fold down and it will swing open at the bottom. NC Industries in Pennsylvania has a pattern for the 27E BTwindshield frame. I have a 27E BT and had my top bows used for a pattern to make new one for me and a friend in Holland. The company to cantact is Oak Bows in Chambersburg,PA. Hope this helps, Tom.

BTT

BTT

33-34 Terraplane & 34 Hudson used a similar coil/switch arrangement also.

If they are 16" wire wheels with 4 lug bolt pattern I am interested.

I need a few things for my 33T8 convertible project. 8 cylinder aircleaner(unique to 33t8), inside door panel trim plate(wing like), coupe convertible rear fenders(differet than sedan/coach). or any other parts thaat may be available. Thank's, Tom.

I have a pair for front fenders for a 51 Roadmaster I would like to sell. The right one is NOS and the left one is a nice used one. Asking 200.00 each, or a reasonable offer. I am located in Mansfield, Ma. Shipping could be a pain, but maybe I could use Greyhound Bus. Thank's, Tom

Thank's for this information, I looked it and the float looks correct for my Essex. I have been through many used floats and am tired of having them fail at the worst time.

I need a float for my Stewart Detroit Lubricator carb on my 1927 Essex. It should fit Essex from 24-28, also Dodge's of the 20's used a similar carb. Is anyone reproducing these floats ?

Is anyone reproducing the carb float for the detroit lubricator carb for 24-28 essex and 20's dodge brothers ?

Also looking for the 8 cylinder air cleaner, have 2 6 cyl cleaners for possible trade. need the inside door window reveal moldings for the conv cpe too.

I have a decent one, but I'm always looking for a better one. What is your price & can you post or send me a pic of it ?

I am looking for rear fenders for a 33 Terraplane coupe or convertable . I would also consider sedan rear fenders, but these will require modification to fit the cv/cp. I would also be interesed in any other parts that are out there. Thank's Tom.

The original paint on my 1927 Essex Boattail was mfg by Dibble. The color was called "Light Milori Green" . does anyone have any information on the Dibble brand of paints ? I want to restore this car correctly, any help would be appreciated. Tom

The original paint on my 1927 Essex Boattail was mfg by Dibble. The color was called "Light Milori Green" . does anyone have any information on the Dibble brand of paints ? I want to restore this car correctly, any help would be appreciated. Tom