-
Posts
372 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Chasander
-
-
Mice built nest plugging drains. If I remember right, when I had fenders off I removed plugs(underneath) to vacuum out all the crap. (mainly my passanger seat padding)
-
Tried that no light comes through
-
Tom very hard to see the shape of the inside of the baffle, maybe a wiggly
-
-
I never watch a Riviera being assembled, but watched “B” and “C” cars being assembled at times(Flint). . I’m almost sure radiator support was on the frame and then fender assemblies from each side of the line. (I said almost sure)
-
Remember how these bodies were delivered to assembly plant. Doors were on (with skin) and aligned. Body was then dropped on to frame(with drive train). Radiator support then installed then fenders(with inners).
- 2
-
Reverbertor adds an echo effect to enhance your sound. People used them when auto radios sound wasn’t very good.
-
Try to save the original clips as the after market ones don’t seem to hold the molding as tight to sheet medal. You may want to remove back seat panel to release clips.
-
Thank you
-
Can someone help me find the link (or thread) where the guy is covering interior panels and dash in leather
thank you
-
Try Hemings for rebuilders
-
Can anyone post a picture of an original emission sticker ( on fan shroud) for an 1981 5.0 liter engine.
please and thank you. -
I acquired an AM/FM radio from a 65 and installed in my 63. I had to use the 65 knobs as the post seemed shorter.
-
I’m thinking I will try a repair with SEM Dual-Mix™ Multi-Plastic Repair Material (part# 39847)
- 1
-
Do feel your booster’s working properly?
- 1
-
No Review yet.
-
Good plan
-
$17.59 on Amazon, $20.O Reilly. I think I Pd $11.00 last year and $7.00 the year before. 😛
-
Isn’t the concern with ethanol gas deterioration of the aluminum in the fuel system? ( AFB Carb)
-
I started trying to get Original Air to rebuild my A/C compressor in Nov. 2022. I sent in the request form and they said to send it in. I winter with in a few miles of their location(Holiday Fl.) so I wanted to deliver it myself. I showed up at the business and they said come back in two weeks, I continued to call them every couple of weeks until April, when I returned back to Mi. Where I bought a new A6 compressor from O’Reilly s for $380.
- 1
-
Make sure you tape glass to avoid scratching, also edge of stainless.
- 1
-
-
Looks like the vent on an axle housing.
-
I used spray adhesive to wrap mine, but not staying very well. I may have used to heavy of a vinyl or glued it wrong.
'65 wheels
in Buick Riviera
Posted · Edited by Chasander
Add photo (see edit history)
Here’s picture of 66 Skylark GS order form, also referred to as Chrome plated wheel (V2).