dodgedave68
-
Posts
26 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by dodgedave68
-
-
Looking for an Original passenger grille side for my pickup. Would look at complete grille too of course.
-
On 8/12/2018 at 5:28 PM, Surf City '38 said:
Ok Folks finished up the master cylinder rebuild...Not much happening the rest of the summer, waiting for the engine blueprinting, vulcanized rubber, emblem rebuilds and of course the bed and cab...as soon as items come back, I will photo journal it.
Still need to purchase running boards and a tailgate.
Big thanks out to Mark Wyman at Marksfinds4lessvintagecarpartsandmore.com by far the largest NOS catalog I could find...
Until then, enjoy the photos...
-
2
-
-
Sagefinds - do you have pics? I have two shells now and one grille that is OK, but looking for better
-
OOPS 1936 Grille.
-
someone stole the whole grille out of my 36 LC 1/2 truck
looking to buy a completed grille - or really good pieces. Car and 1/2 ton should be same for 36. Will consider a 37 1/2 truck grille (it will fit)
-
HI - not sure what you are doing with the Dodge - but If the grille is nice let me know, if you are selling car or parts
Thanks - if its a 1936
-
Wanted a very good to great, 1936 Dodge LC Pickup truck GRILLE.
Thanks
-
I dont have a rear axle yet - I am mainly concerned about correct length, 35/36 axles differ from 37/38 and mine is a 36 rear axle - a guy has a few but doesnt know which is the 36 any longer
-
Hi - need to know the length (full collapsed or extended) for a 1936 Dodge LC truck driveshaft is - I have found an axle (yet to be delivered), but need to buy a driveshaft as well.
-
Hi - need to buy a driveshaft for my 1936 Dodge LC pickup. found a potential supplier, however he cant identify one from the other.
does anyone have the dimensions?
-
anyone doing a 28/29 desoto my dad has a rough 4dr sedan in Ontario Canada near ottawa, he is interested in selling cheap
-
HI - Any chance you would ship the tailgate to Dallas?
-
well i do know where a 36 desoto is ,......
-
so 37 PLYMOUTH cars are different than 36 LC?
-
HI -
Looking for measurements - 1936 dodge 1/2 ton
spring perch center to center
axle flange to axle flange
Ive read states that 1936 are 59.00 flange to flange, and 1937 are 60 inches from flange to flange
I need a new housing for my LC, and I guy as a 1937 CAR rear axle
unfortunately springs are off right now, so cant tell perch to perch measurement either
-
got it - now for the striped bolts lol
-
OK - so unscrewed the two top hinges on the windshield, and then cranked out the adjuster so I could easily access the two bolts holding the windshield to the metal ribbon crank mechanism.
Now I cant get the ribbon mechanism to crank back in - it gets stuck and cant be turned anymore (BTW - is 1/2 a crank normal slack ?)
It looks like there is a wheel with tabs, and the tabs go thru holes in the ribbon to move in and out.
Ideas welcome.
Thanks
-
if i reading the parts book correctly: 573874, for 1936
1938 is 585937
-
dang my dad was just there - i think they are the same as my 36 dodge truck.
if i can find someone coming to Texas, Ill follow up
-
Hi - does anyone have measurements and / or pics of a 1936 Dodge pickup radiator? or what yrs/models interchange?
I need one and well almost all ive found dont have a part number to match the parts book I have.
-
If either end up being for a 1936 Dodge truck, I am interested.
-
do you have parts left? can you measure the rear axle perch center to center.
how about the radiator
-
Hi,
Just purchased a 1936 Dodge Pickup, which unfortunately was being slowly stripped by street folks for drugs or whatever, when the former owner died and family left cars unattended.
Truck is a nice original beauty, but now needs;
rear axle, bumpers, hood, grille and headlights and radiator. Could also use full set of hubcaps, but well those are rare.
Anyone have really good versions of parts above.
and no - not for sale, wanted a 36 since I was 19 and saw my first one :)
Thanks
-
hi - love to see some pics - ive been looking around for a dodge/plymouth in original shape.
thanks
hi - the master and wheel cylinders were new - corroded fast. that drag link was nos wish i another - truck is looking amazing
Lost Topic - 1938 1/2t Engine Removal Project
in Dodge Trucks
Posted
It is looking FANTASTIC!!