[Trunk, boot, rear deck, info needed]

mine sticks out 3/8 of an inch from back plate of deck lid, just measured it.

[Ring help]

I don't think they are stock then and you may try egge and see if they have a spare. Tried Napa because they can get single sets on later stuff.

[Ring help]

I have an original box that is falling apart hs6149-ar that says standard 2 3/4 x 3/32 does that work?

[Ring help]

let me know what overbore you need, I think I can fix you up. Let me know thickness of that ring also.

[Trunk, boot, rear deck, info needed]

I have a 38 coupe, exactly what do you need?

[Deck lid needed]

or you could buy the cutup coupe for 15,000 on ebay and part it out.Cheaper than 90,000

['40 Water Temperture Guage]

I believe there are a couple of different sensor temperature ranges. Is it running warmer or are the sensors starting high up on scaling?

[Wiring Harness for a 48 continental]

Narragansett reproductions, 401 364 3839 The wiring harnesses are spot on. In R.I so probably under 3 feet of snow now.

[1938 Zephyr grills]

very expensive!!!

[V12 intake manifold]

very common, good aluminum welder can fix it

[1937 Lincoln Zephyr for parts or whole]

where is the car? I travel a bunch and can see if its worth picking up

[zephyr thermostats, yes or no?]

I don't in my 38 and have no issues

[New Years Resolution]

I had three back surgies in 9 months finallt ended up with fusion and titanium cage. Cll me and we can exchange info 317 644 9578

[New Years Resolution]

I am not an expert by any stretch but have a 26,xxx mile 38 coupe if you need info.

[337 Zephyr build thread]

I am sure so people don't appreciate what you have done but your metal working skills are incredible!!!!

['41 Connie Cross Country Route?]

Iam in the Indianapolis area if you need help 317 644 9578

[Participation on this forum sucks!!]

Some people enjoy bitching no matter what happens, personally I hope he disappears again.

[Engine and Transmission Removal]

I found it real easy to pull in two pieces. When I went back in I installed tranny first and motor slid right in.

[Straightening Out Steering Wheel?]

kind of scary he doesn't know,hope he doesn't turn one out all the way with one thread left

[1938 Zephyr ammeter]

I have a 38 coupe with 26xxx miles on it where are you located?

[1938 Zephyr ammeter]

It sense current and direction passing through the loop. When rewiring you need to insure proper direction of the wire through the loop or it will read backwards.

[1938 zephyr coupe questions]

Standard h patternto the left and up is reverse, down(back to you) left 1st I have a 38 coupe with 26,xxx miles I am in Indy area.

[41 Parts for Sale]

I need 41 aluminum heads for my continental do you have any for sale? any extra columbia controls or rear dust pan

[41 Cont. - Help using dash gauges post 12V conversion]

changing it for ''Safety'' is nonsense. If you have a new harness that is not shorting out there is no safety factor in using 6 volt systems.

[What's this Steering Wheel Off of? Need It?]

dougj_nsi@sbcglobal.net My 41 has ''lincoln twelve'' also but really cracked up. I would like to see it please. 317 644 9578 Thanks