aacalifeer Posted January 28, 2013 Share Posted January 28, 2013 I'm trying to help a friend with a '65 GTO with a 389. He has a stock fuel pump. Unfortunately he has lost the fitting for the out bound / pressure side of the fuel pump. We have looked / tried several fittings with no luck. Can anyone tell us what the fitting is supposed to be ? Or point us in the direction of the correct fitting ? Thanks for looking and any help you can offer Link to comment Share on other sites More sharing options...
F&J Posted February 1, 2013 Share Posted February 1, 2013 I would think that fitting system would be the same as other GM cars of that age.Those would have a fitting with male 1/8" NPT threads to screw into the pump. The other end would be female w/flare to accept 5/16" or 3/8" metal flared brake/gas tubing: (the pre-flared metal brake/Gas line assortments in parts stores)Some cars used 5/16 steel line to the carb, and some used 3/8.Any auto parts store will have that very common fitting, if that is what it was. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now