34Coop Posted April 19, 2007 Share Posted April 19, 2007 I have a '34 dodge one ton that I want to remove the front brake drums from but I cannot figure out how they come off. There is some type of extension hub fastened to the brake drum with 5 nuts holding it to the drum, I tried removing the se nuts but the entire stud and nut turn. There is a big dustcover looking end on the extension that is six sided that looks like it is used to turn it off but it looks like the extension is all one piece cast unit. Any help would be appreciated. Going to Carlisle tomorrow, may find a manual that can help me. Link to comment Share on other sites More sharing options...
34Coop Posted April 19, 2007 Author Share Posted April 19, 2007 Well, I solved the problem, it was a dustcap and it did turn off to expose the nut and wheel bearing to remove to get the drum off. Link to comment Share on other sites More sharing options...
Guest toybox99615 Posted April 20, 2007 Share Posted April 20, 2007 not being a wise guy I'll ask if you know how to adjust the wheel bearing when your reassembling. It real easy to over tighten the nut and casue wheel bearing failure. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now