Guest Blownolds Posted November 28, 2005 Share Posted November 28, 2005 Have the following early '49-64 Olds 303-394 rocket engine parts for sale:--bare Offenhauser aluminum 2x4 intake manifold for '57-8 371, glass beaded nice and clean, $150--rebuilt pair of '61-4 #23 394 heads, $250--pair of ported '59-60 371/394 heads, from a blown alcohol race boat engine, have stainless intake valves, pushrod holes enlarged for pushrod clearance with high-lift cams, O-ringed, polished chambers, need rebuilding, $250--'59-60 394 bare block, machined at the shop, has a large 4.240 or 4.250 bore (would have to double-check that), has cam bearings installed, $150 (CAN'T SHIP)--'55 324 bare block, has notches ground in the bottom of the cylinders for rod clearance with a stroker crank, $40 (CAN'T SHIP)--NOS rebuilt water pump for '49-53 (I think it should physically fit all through '62 though), $40--have various main and rod bearing sets, new, $40-60 per set depending on which sets--'59-64 Weiand blower manifold, $450--NOS 145-tooth flywheel ring gear for '49-53 stick flywheels, will also fit the 14-1/2" flywheels through '60, $35--solid roller cams for '49-55 (and I might have just one left for '56-8 as well), ready to install and run, $150 each (If you want to buy one, I have specs available)--roller lifters for '49-56 blocks, $150--early black-cap Mallory dual-point distributor, $195--303 block with crank, rods, and Jahns pop-up pistons, disassembled, $145 (CAN'T SHIP block and crank, but I'd be glad to sell and ship the rods with pistons for the same amount if you want to do that-- I'd have to then dispose of the block and crank some other way)Who knows what else will turn up in the garage...All shippable items, add shipping from the Los Angeles areaDO NOT PM ME, instead please e-mail me direct at blown394olds@yahoo.com Link to comment Share on other sites More sharing options...
sangersam Posted November 30, 2005 Share Posted November 30, 2005 did you get my e-mail about exhaust gaskets? thanks. Link to comment Share on other sites More sharing options...
Guest Blownolds Posted December 28, 2005 Share Posted December 28, 2005 Yes I did. I replied but I never heard back from you. Link to comment Share on other sites More sharing options...
Riley77777 Posted January 18, 2006 Share Posted January 18, 2006 Looking for a lower bell housing for olds 394 (1959-1960) with starter bracket on passenger vs driver side. Ansen made them for sure. Link to comment Share on other sites More sharing options...
Guest Blownolds Posted January 27, 2006 Share Posted January 27, 2006 None of those for sale at the moment, sorry. Link to comment Share on other sites More sharing options...
eltweedy Posted July 12, 2006 Share Posted July 12, 2006 What parts are avaible, do have adj.rocker rocker arms for that car?DON Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now