My 69 Cutlass is dragging its rear end......

[Guest]

Will springs from like a 69 Olds Ninety Eight or Vista cruiser fit in the rear?

[thegnugod]

First you need to measure the pockets in the frame on your car an the recievers on the axels then measure a spring from the model you like . GM used the same springs on lots of cars just different load ratings . OH dont forget to measure the total height if its too tall your car will ride like a truck or stand with its trunk in the clouds .

Gary

[66400]

Vista Crusier springs will work/fit however may make your car sit too high. 98's will not. Henry

[442jones]

I replaced the spings on my 72 Cutlass S a few years back. I used Moog heavy duty spings in the back with a set of Moog regular big block springs on the front. I do not recomend the heavy duty for the front. It will be to much spring and they will bulge out a little. I used regular performance gas shocks all around and the car set level front to rear. I have used this same set-up with a big block and small block in the same car. There was little to no difference.