Terry Wiegand Posted September 7, 2017 Share Posted September 7, 2017 Here are photos of the sealing rings for the six cylinder models from 1918 thru 1923 intake cages. The rings measure 2.060"/2.061" on the OD. This is Buick Motor Company part #36033 and the rings were machined to Buick Motor Company Engineering Department Specifications. I made a few extra sets above what I needed for my cars and when these are gone that will be it. They are $15.00 each plus the shipping. Terry Wiegand South Hutchinson, Kansas terrywiegand@prodigy.net Link to comment Share on other sites More sharing options...
unimogjohn Posted September 7, 2017 Share Posted September 7, 2017 Terry, do we need 12 for a complete head? Link to comment Share on other sites More sharing options...
Terry Wiegand Posted September 7, 2017 Author Share Posted September 7, 2017 John, the intake valve increased in diameter beginning with the 1918 models and ran through the end of the 1923 models. So, you have 6 of the intake rings and 6 of the smaller exhaust rings on the six cylinder engines. Terry Wiegand South Hutchinson, Kansas Link to comment Share on other sites More sharing options...
unimogjohn Posted September 7, 2017 Share Posted September 7, 2017 Terry, I will take 6 then for my 23. I can pay via PayPal if you have that set up. Just let me know here or PM me. Link to comment Share on other sites More sharing options...
Terry Wiegand Posted September 7, 2017 Author Share Posted September 7, 2017 John, PM sent Terry Wiegand South Hutchinson, Kansas Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now