07 HD Posted June 10, 2017 Share Posted June 10, 2017 have gas pouring out of vent hole on top cover of carb Link to comment Share on other sites More sharing options...
Guest Posted June 10, 2017 Share Posted June 10, 2017 Probably float stuck with needle open. Tap lightly on the float bowl with the handle of a screwdriver or better yet take the cover off and look inside. Link to comment Share on other sites More sharing options...
07 HD Posted June 11, 2017 Author Share Posted June 11, 2017 3 hours ago, Tinindian said: Probably float stuck with needle open. Tap lightly on the float bowl with the handle of a screwdriver or better yet take the cover off and look inside. OK have cover off float and needle removed anything else to look at or check before putting back together ( one thing not very confident about is carbs and trans) ok I guess that is 2 things Thanks Ted Link to comment Share on other sites More sharing options...
Guest Posted June 11, 2017 Share Posted June 11, 2017 You can run the engine with the top off the float chamber. That will tell you id it is shutting off or not. Make sure the float moves freely and that it floats. Hold the float up or the needle down until the engine stops to make sure it doesn't stick at the bottom. Then restart and make sure the float shuts off before the chamber overflows. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now