50Traveler Posted December 5, 2015 Share Posted December 5, 2015 I was planning to install a flush tee in a heater hose and finally flush the nasty crud that passes for water in my DeSoto. I have looked at so many pictures on google that show the hoses installed in different ways. Does anyone have the definitive answer as to what hoses go where? The water pump has two heater hose fittings, on to the impeller and on behind and above that. The firewall has two connections at the top on the passenger side that I believe go to the heater valve. Then the heater has top and bottom connections. In my mind it should be pump to valve, valve to heater, heater to engine. Which side of the valve then should be the intake? Is a factory a/c'd car any different? Thank you,Justin Link to comment Share on other sites More sharing options...
Guest thomaskenney Posted December 13, 2015 Share Posted December 13, 2015 i have a 1960 Desoto Adventurer 4 door hard top with 383 and factory airI took pictures of the AC/ heater hoses.send me an e-mail address and I can send you the picturesez2c@qis.net also the 2016 Desoto National Convention is July 5-10, 2016 in Timonium MDcheck out the details and the video:www.desotoclubmd.com cheers, tom kenney Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now