RPAust1 Posted November 3, 2012 Share Posted November 3, 2012 I am seeking a clutch housing shield and pan for a 37 President 3C. It comes in 2 parts and is shown on the attached as E5-4 (Part number 188674 for the shield ) and E5-5 ( Part number 189535 for the pan) Any assistance as to where to enquire would help37 Pres, Pan,lower clutch housing0001.pdf Link to comment Share on other sites More sharing options...
Batwing-8 Posted November 4, 2012 Share Posted November 4, 2012 1) Can't open your photo......my computer doesn't speak .GIF!2) Is your clutch cover missing or just damaged? I ask, because if your cover is like my '36, you'll find it's aligned to the engine block with a stud at the top, and two #7 tapered pins (and holes) at the lower right and left corners. If you use a cover different from that which was originally installed on the motor, you may...... MAY find that the locations of the pin holes are slightly different from cover-to-cover. This could result in mis-alignment between the clutch and flywheel. Link to comment Share on other sites More sharing options...
RPAust1 Posted November 4, 2012 Author Share Posted November 4, 2012 Unfortunately the car came in parts and quite a few were missing, I am trying to find out if the 36 -37 are possibably interchangeable. I have to find out first and get back to you.I appreciate your help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now