Guest jim maenner Posted June 25, 2012 Share Posted June 25, 2012 Help, I've been trying to remove the dash so I can begin to replace the wiring harness, having much difficulty. I thought I had most bolts removed, are things welded. Windshield is still in place, should it be removed? Any very specific help would be appreciated, especially photos or diagrams. Another question is do I need to remove and replace harness? Insulation good under dash; frayed in engine compartment. Can I tape or correct the fraying. Help, Jim P.S. Is there a market for a partially restored ,49 Roadmaster Dynaflow? Link to comment Share on other sites More sharing options...
Guest Chrome Posted June 26, 2012 Share Posted June 26, 2012 Dash is not welded. I removed all chrome trim from inside but windshield is still on. I don't remember how many bolts there are, but I do remember that it took a while Link to comment Share on other sites More sharing options...
Guest jim maenner Posted June 28, 2012 Share Posted June 28, 2012 Jani, Thanks for the response. I can get the dash loose from the pax side but things are more complicated on drivers. Anything you can offer or if you know of someone who can provide info I would certainly appreciate. Thanks, Jim Link to comment Share on other sites More sharing options...
jackofalltrades70 Posted June 28, 2012 Share Posted June 28, 2012 Jim,Did you unbold the steering column bolts? They might have been overlooked as they also hold the dash on. Matt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now